Metz Plasma-TV-Set Flat Panel Television User Manual


 
97
"DiSEqC" makes it possible to control the satel-
lite antenna digitally via the existing antenna
cable and is a prerequisite for the reception of
signals from more than two satellites (e.g.
Astra, Eutelsat, Hotbird).
If you wish to receive signals from at least three
satellites (e.g. ASTRA 19.2°, Eutelsat 16°, Hot-
bird 13°) the antenna system can be controlled
only with the aid of "DiSEqC".
This menu item is not available in a 2**
menu.
Switching DiSEqC on and of
f
Press the MENU key to open the TV
menu.
• Press the red key to open the menu
"Configuration".
• Press the appropriate numeric key (in
this example
to select "DVB-S".
• Use the cursor control key to select
"DiSEqC system" and press the OK
key to confirm the selection. The cur-
sor is now located in front of "DiSEqC
system" in the setting window.
• Use the
-
+
to select "Yes" or "No".
• Press the OK key to confirm the new setting.
• Press the EXIT key to close the TV menu.
A1.1 Set-up of satellite system
DiSEqC system
i
Calling the menu
MENU
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
OK
EXIT
General settings
Manuall search
Automatic search
Search settings
Satellite D
Satellite C
Satellite B
Astra 1
DiSEqC system
LNB supply voltage
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S
Analog-TV
Country
Language
Operating
DiSEqC system on
Change with
Accept value with
F1
OK
– +
605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 97