Filter
Top Products
-
24
-
11.3.1 Connection and disconnection
When you click the [Connect] button on the recorder list window and enter your user name and
password on the login window, you will be connected to the selected digital recorder that is high-
lighted in the list.
Enter the user name and password that have been registered in the digital recorder you want to
access. In DX-TL2530E and DX-NT430E digital recorders, the default user name and password
are as follows:
Administrator user General user
User name: root User name: guest
Password: admin000 Password: guest
By selecting another digital recorder and clicking the [Connect] button while you are communicat-
ing with the selected recorder, you will be disconnected from the selected recorder and connected
to such another recorder.
When you click the [Disconnect] command on the recorder list window, you will be disconnected
from the digital recorder you are communicating with. This button doesn’t work unless you are
communicating with a digital recorder.
11.3.2 Registration - Available on the recorder list window of detailed type only
When you click the [Add...] button on the recorder list window of detailed type, the [Recorder
Property] window will appear. You can add digital recorders using this window.
[DVR Name] (optional) ------- Enter the name of the digital recorder to register.
[Camera Name] (optional)--- Enter the name of the camera (or installation location) to register.
[IP Address] (essential) ------ Enter the IP address of the digital recorder to register. When
registering a DX-TL2530E or DX-NT430E digital recorder, enter the
IP address shown on its <ETHERNET> screen. DX-PC25EA commu-
nicates with the digital recorder based on this number. If you enter a
wrong number, DX-PC25EA doesn’t communicate correctly. In addi-
tion, duplicate IP addresses aren’t accepted.
[Recorder Ch] (optional) ----- You can select a camera or saved screen layout to use at the time of
connection.
[Info Port No.] (essential) ---- Enter the information port number of the digital recorder to register.
This number should be consistent with the setting value of the digital
recorder to be registered. When registering a DX-TL2530E or DX-
NT430E digital recorder, enter the number shown by [USER AC-
CESS] on the <SERVICE PORT SETTING> screen. The number
“53705,” which is the initial setting of DX-TL2530E and DX-NT430E
digital recorders, is displayed by default. DX-PC25EA communicates
with the digital recorder based on this number. If you enter a wrong
number, DX-PC25EA doesn’t communicate correctly.