Filter
Top Products
-
8
-
When you click the secondary mouse button (or the right button in the standard setting) on any of
the split screens, the following menu will appear.
For details of the [Copy] command, please refer to Section 5.1 “Copy command” ( page 17).
By selecting the [Assign] command and a camera number, you can assign the selected camera
number to the split screen you clicked. The assigned camera number will be saved in the registry
and appear on that position from the next start of the program.
When the [Save Layout] button is held down, the picture layout in the split screen display mode is
saved and such layout is used from the next start of this software.
When you select the [Reset] command, assignment of the camera numbers on all the split screens
is initialized.
By selecting the picture quality level using the [Quality] command, you can change the quality of
live pictures. However, only one person is authorized to change the picture quality per digital
recorder. Therefore, you may not able to change the picture quality depending on your authority
given at the time of connection.
When you select [Mode Out Control...], the [Mode Out Control] window will appear. For details of
this function, please refer to Section 11.7.4 “Mode Out Control command” (
page 31).
Note:
- The refresh rate may decrease in the split screen display mode.
3.2 Operation panel
With DX-PC25EA, you can play back the pictures recorded by the DVR.
Function of each button is described below.
Button Command Function
Rewind Click to jump to the head of the recorded data.
Reverse search Click to play the video in the reverse direction with a higher speed
than normal playback. The search speed changes from X1 to X2,
X4, X8, and back to X1 at every press of this button. You can
specify the number of fields skipped in search using in the [Op-
tions] command in the [View] menu.
Reverse playback Click to play the video in the reverse direction.
Field reverse Click to display a still picture one field before.
Stop Click to stop playing back the video. Audio, if recorded, will be
played back after stop when the audio command has been enabled.
Field advance Click to display a still picture one field after.
Play Click to play the video in the forward direction.