Mitsubishi Electronics WD-52528 Projection Television User Manual


 
87
Chapter 6. Special Features
Appendix B: Specifications
TV Specifications
Projection System 3 LCD, 0.7” x 3, 1280 x 720 pixels
Lamp 110 watt high-pressure mercury discharge
Channel Frequency Reception Over-the-Air: VHF 2 - 13, UHF 14 - 69
Analog Cable: 1 - 125
Digital Cable: 1 - 135
Channel Type Over the Air: Analog NTSC, Digital ATSC with sub-channels
(all 18 video formats)
Cable: Analog NTSC (non-scrambled)
Digital QAM 64 and 256 with sub-channels (non-scrambled)
CableCARD™: Authorized scrambled and non-scrambled digital channels
Note for Digital Channels: The channel numbers displayed on-screen are determined by the broadcaster or cable
company and can vary from the standard frequency number. If there is no channel number information included from
the broadcaster or cable company, then the TV will create a channel number based on the frequency number as the
main channel number and the program number as the sub-channel number. When using an authorized CableCARD, the
channel numbers are determined by the cable company.
Inputs
Antenna/Cable input: Qty 2 F connector, 75-ohm
HDMI (digital video/audio): Qty. 2
Signal Type
HDMI standard connector
HDMI standards for digital PCM audio and video (480i, 480p, 720p, 1080i).
Not intended for use with computer-specific resolutions.
Video/S-Video: Qty. 3 each
Signal Type
Video: RCA Pin Plug, 1.0 Vp-p, 75 ohm
S-Video: Four Pin Din Plug
Y: 1.0 Vp-p 75 ohm
C: 0.286 Vp-p (burst signal), 75 ohm
NTSC 480i only
Component Video (Y/Pr/Pb)
WD-52527, WD-62527: Qty. 2 sets
WD-52528, WD-62528: Qty. 3 sets
Signal Type
RCA Pin Plug (EIA-770.3 Standard Levels and Timing)
Y: 1.0 Vp-p (includes sync), 75 ohm
Pr: 700 mVp-p, 75 ohm
Pb: 700 mVp-p, 75 ohm
EIA-770.1 & EIA 770.2, 480i, 480p, EIA 770.3, 720p and 1080i (video
standards)
Audio Inputs:
WD-52527, WD-62527: Qty. 7 pairs
WD-52528, WD-62528: Qty. 8 pairs
RCA Pin Plug 500 mV (full scale), 43 k ohm
Outputs
Video
Record Video: Qty. 1
Signal Type
Video: RCA Pin Plug 1.0 Vp-p, 75 ohm
NTSC 480i only
Audio
Audio Outputs
Audio Output: Qty. 1 pair
Record Audio Output: Qty. 1 pair
RCA Pin Plug, 500 mV rms
+
200 mV (full scale) for analog sources.
1.5 V
+
0.5 V (full scale) for digital sources.
From time to time, Mitsubishi may offer software updates to expand the features or operation of this TV. When these
updates are available they will be announced on our website site, Mitsubishi-tv.com. If you return your Owner’s
registration card, with your model and serial number, you may receive written notification of available software updates.