Filter
Top Products
8 - 18 8 - 18
MELSEC-Q
8 PROGRAMMING
(a) When using the functions listed below, use the following
programs.
1) When the disable count function is used
Starts the disable count
function
Stops the disable count
function
2) When the latch counter function is used
Executes the latch counter
function
Turns off Counter function
execution start signal (Y1026)
3) When the sampling counter function is used
Executes the sampling counter
function
Turns off Counter function
execution start signal (Y1026)
4) When the periodic pulse counter function is used
Executes the periodic pulse
counter function
Turns off Counter function
execution start signal (Y1026)