Mitsumi electronic WD-73734 Flat Panel Television User Manual


  Open as PDF
of 84
 
6. NetCommand 51
Key Name in
Learning Screen
Special Operation Description and Setup How to Use
Power On Manual Power On/Off
Usefordevicesthathaveonlyone
POWER
key.
1. Press
INPUT
todisplaytheInput Selection
menu.
2. Press tohighlighttheiconforthe
devicetobepoweredonoroff.
3. WiththeInput Selectionmenustilldisplayed,
press
POWER
tosendthepowersignal;youmay
needtopress
POWER
twice.
Note:Ifyoupress
POWER
withouttheInput
Selectiondisplayed,theTVwillturnoff.
4. Press
ENTER
toswitchtheTVtothedevice.
Power On
Power Off
Automatic Power On/Off
Thisfeatureisonlyfordevicesthathaveseparate
POWER ON
and
POWER OFF
keysontheiroriginalremote
controls.Ifyourdevicedoesnothaveaseparate
POWER OFF
key,donotusethePower Offlearn-
ingposition;useonlytheManualPowerON/OFF
methoddescribedabove.
IntheNetCommandLearnscreen:
a. “Learn”thePower OncommandinthePower
Onlearningposition.
b. “Learn”thePower Offcommandinthe
Power Offlearningposition.
• To Power On the Device
1. Press
INPUT
todisplaytheInput Selection
menu.
2. Press tohighlighttheiconforthe
devicetobepoweredonoroff.
3. Press
ENTER
toswitchtheTVtothedevice
andNetCommandwillsendthePower On
commandtothedevice.
• To Power Off the Device
WhenyouturntheTVoff,theTVsendsall
learnedPower Offcommandstoalldevices.
Menu Displaying Device Setup Menus 1. Whilewatchingadevice,press
INPUT
todisplay
theInput Selectionmenuwiththedeviceicon
highlighted.
2. Press
MENU
tosendthemenusignaltothe
device.TheInput Selectionmenuwillauto-
maticallyclearfromthescreen.
Special Operation Methods
Operating NetCommand-Controlled Devices
To Control an A/V Receiver
Switching Audio to and from the A/V Receiver
1. Press
AUDIO.
2. Press toshowtheSpeakersoption.
3. Press toselecteitherAV ReceiverorTV.
Controlling A/V Receiver Power
1. Press
AUDIO.
2. Press toshowtheSpeakersoption.
3. Press toselectAV Receiver.
4. PointtheremotecontrolattheTV(nottheA/V
receiver)andpress
POWER
topowertheA/Vreceiver
onoroff.
Controlling Other A/V Receiver Functions
WiththeA/Vreceiverpoweredonandselected,the
TV’sremoteoperatesthevolumeandmutefunctions.
Also,whenyouswitchtoadeviceintheInput Selec-
tionmenu,theA/Vreceiverautomaticallyswitchesto
thecorrectaudioinputforthedevice.
To Control Most Device Types
AsanexampleofNetCommandcontrol,ifyouare
watchingyourcableboxandyouwishtotunetothe
nextchannelhigher,press
CH/PAGE
.NetCommand
thensendsthe“learned”channel-upcontrolsignalto
thecablebox.
1. WithanIRemitterproperlypositionedinfrontofthe
device,usetheInputs > Learnscreentoperform
NetCommandsetupforthedevice.
2. Whenyouwishtousethedevice,press
INPUT
to
displaytheInput Selectionmenu.
3. Press tohighlighttheiconforthedevice.
4. Press
ENTER
toswitchtheTVtothedevice.
Note:
ifyouhavesetupautomaticinputswitching
fortheA/Vreceiver,theA/Vreceiverwillautomatically
switchtothecorrectinputforthedevice.
5. TooperatethedeviceusingtheTV’sremote
control,settheslideswitchtothe
TV
position.
6. PointtheremotecontrolattheTV(notthedevice)
andpressthekeyforthedesiredfunction.
 previous next