Filter
Top Products
45
Press the Enter Key after completing all of these settings.
8. If you set label to “Yes,” the following screen will be displayed. If you set
label to “No,” you will be returned to the Initial Lamp Display.
Input the label and press the Enter Key. You can also press the F3
Function Key to input from a list of marks that have been created. Refer
to page 22 for details on the mark input procedure.
Note 1. Labels can be only one line long. Input character strings if longer labels
are required.
2. “@” will be input as the default label if the label setting is changed from
NO to YES.
Set the size and scale of the label display.
Position the label on the screen.
When lamp settings have been completed, you can return to set another
lamp or you can continue pressing the Escape Key to return to the Initial Edit
Display.
Deleting and Modifying Direct connection lamps are deleted or modified from the display shown in
step 1. above. Select the number of the numeral table and then specify DE-
Lamps Section 2-4