Filter
Top Products
51
Note 1. Labels can be only one line long. Input character strings if longer labels
are required.
2. “@” will be input as the default label if the label setting is changed from
NO to YES.
Set the size and scale of the label display.
Position the label on the screen.
When touch switch settings have been completed, you can return to set
another touch switch or you can continue pressing the Escape Key to return
to the Initial Edit Display.
Deleting and Modifying Direct connection touch switches are deleted or modified from the display
shown in step 1. above. Select the number of the numeral table and then
specify DELETE or MODIFY. The modification procedure is basically the
same as the creation procedure given above.
2-6 Bar Graphs
Values from numeral tables can be used to create bar graphs by setting the
numeral table entries to be referenced, the display positions, the display
style, and the display direction. Bars can also be displayed in the negative
direction and the display direction can be reversed.
You can set a maximum of 8 bars per screen for the NT20M and 50 for the
NT600M.
The procedure for setting bar graphs depends on whether or not direct con-
nection is ON or OFF in the Tool Settings. Both procedures are given below.
Bar Graphs Section 2-6