Onkyo DR-2000 DVD Player User Manual


 
10
Connecting to a TV
Before connecting
Refer also to the instruction manual of the TV.
When you connect the DVD Receiver to the TV, be sure to turn off the
power and unplug both the units from the mains before making any
connections.
Connect the DVD Receiver to the TV directly. If you connect the DVD
Receiver to a VCR, TV/VCR combination, or video selector, the
playback picture may be distorted as DVD videos are copy protected.
(White)
L (White)
R (Red)
To audio outputs
(Red)
(White)
TV
Connect the plugs securely.
Note that one audio/video connection cable
and one S video connection cable are
supplied.
Incomplete
Insert completely
TV
: Signal flow
(Red)
Stereo audio connection cable
Video connection cable
L (White)
To audio outputs
R (Red)
(Yellow)
To video input
To S video input
REMOTE
CONTROL
OUT
OUT
VIDEO 11 – VIDEO – 2
ININOUT IN
IN OUT
(REC)
IN
(PLAY)
IN
IN
VIDEO 2
VIDEO
1
VIDEO
2
TAPE/MD
SUB
WOOFER
PRE OUT
CENTER
SPEAKER
SURROUND
SPEAKERS
S VIDEO
AUDIO
R
L
IN
TV/LINE
MON
OUT
MON
OUT
L
VIDEO
AUDIO
R
R
L
R
BA
L
FRONT SPEAKERS
FM 75
ANTENNA
AM
DIGITAL OUTPUT
VIDEO 1
(OPT)(OPT) (COAX)
VIDEO 2
DIGITAL INPUT
YP
B
P
R
COMPONENT VIDEO OUTPUT
S video connection cable
Both the S video and video connections are necessary,
otherwise the picture from equipment to be connected on
the next page may not be output to the TV.
Connecting to a TV With Component
Video Inputs
If the TV or monitor has component video
inputs, make this connection. Connecting to
these inputs allows you to enjoy higher quality
picture playback compared to the connections
explained in “Connecting to a TV Without
Component Video Inputs” below.
Notes
Actual labels for component video inputs may vary
depending on the TV manufacturer (ex. Y/CB/CR, Y/
B-Y/R-Y, etc.).
In some TVs, the color levels of the playback picture
may be reduced slightly or the tint may change. In
such a case, adjust the TV for optimum
performance.
Connecting to a TV Without
Component Video Inputs
If the TV or monitor has an S video input, make
the S video connection. The S video connection
will provide higher quality picture playback.
Y
To component
video inputs
PB PR
Stereo audio connection cable
Component video connection
cable
Only pictures from a DVD video or
VIDEO CD played with the DVD
Receiver will be output to the TV.
(Yellow)
DO NOT connect the
power cord (mains lead)
at this time.