Filter
Top Products
32
DVD/CDVIDEO 1VIDEO 2TV/LINE
TAPE/MD
AM VOLUME
INPUT
FM
TUNER PRESET
TUNING
SPEAKER A/B
TEST TONE DISTANCE CH SEL
Theater-Dimensional
SETUP
Theater-Dimensional
DOWN
UP
SUBWOOFER
MODE
FM MODE PRESET MEORY
DISPLAY
SPEAKER SETUP
SURROUND STEREO
ACOUSTIC
CONTROL
STANDBY/ON
ON
STANDBY
POWER
PHONES
OFF
ON
Various Functions Common to all the Sources
PHONES jack MASTER VOLUME
Adjusting the Volume
The volume of the front left and right, center, surround left
and right, and subwoofer speakers will be adjusted at the
same time.
When headphones are connected (see next page), you can
adjust the volume of the sound through the headphones.
Operating with the remote controller
Press VOL / .
Operating with the unit
Turn VOLUME clockwise to
increase the volume, or
counterclockwise (anticlockwise)
to decrease the volume.
Muting the Sound
Press MUTING.
“Muting” appears in the multipurpose display
for about three seconds. Also the MUTING
indicator flashes in the display during the
muting mode.
To restore the sound, press MUTING again.
Tip
If you turn off the unit during muting, and turn it on again, the sound
will be restored.
MUTING
VOL
MUTING
Remote
controller only
Display
SPEAKER A/B
PHONES
OFF
ON
OFF
ON
Press lower
part of the
cover to open.
VOLUME
r, e, s lamps (buttons)
→
SP A B
Turning on/off the SPEAKERS A/
SPEAKERS B Systems
You can turn on or off the speaker systems connected to the
SPEAKERS A and SPEAKERS B connectors individually.
Note
If you turn on the SPEAKERS B system, the SPEAKERS A system
also reproduces stereo sound automatically. (The listening mode is
set to “Stereo.” See page 38.)
Even if you turn off the SPEAKER B system later, the listening mode
remains to “Stereo” until you select another listening mode.
Operating with the remote controller
Press SP A to turn on or off the
SPEAKERS A system.
Press SP B to turn on or off the
SPEAKERS B system.
Note
It is impossible to turn off both speakers at the same time.
Operating with the unit
Press SPEAKER A/B repeatedly.
Each press of the button changes the On/Off
mode as follows:
Only the SPEAKERS A system turns on.
↓
Only the SPEAKERS B system turns on.
↓
Both the SPEAKERS A and B systems
turn on.
The lit SP A and SP B indicators indicate the
corresponding speaker systems are On.
7
SP A
--
/
---
SP B
+
10
SPEAKER A/B