Onkyo DR-2000 DVD Player User Manual


 
56
Dynamic Range Control
DVD
Off: Full dynamic range is maintained.
On: Dynamic range is reduced.
Notes
This function works only with playback of Dolby Digital recorded
discs.
The level of Dynamic Range Reduction may differ depending on the
DVD video.
Karaoke Vocal
DVD
The vocal output feature is used during playback of
Dolby Digital (multichannel) recorded DVD KARAOKE
discs. This feature allows you to turn off vocal audio
tracks, or restore them for background accompaniment.
Off: The primary vocal is not output.
On: The primary vocal is output if it is recorded on
the disc.
Extended Audio Feature
DVD
Some DVD videos contain a narration track for visually
impaired persons. The DVD Receiver automatically
plays the narration track by setting this item to On.
Off: The narration track is not played.
On: The narration track is played automatically.
Customizing the Function Settings
Explanation of Each Item in the Audio Category
Note
To know the factory setting for each item, see the on-screen
illustration on the left.
Audio Out Select
DVD
VCD
CD
The output sound format can be changed according to your
purpose and preference by changing the sound signal
conversion method.
The sound signal conversion method is selected from among
the three listed below. (Note that the three items are sound
signal conversion methods, not the sound signal format the
sound signals are converted into.)
When Audio Out Select is set to Bitstream, the sound is
output in the most suitable format automatically through the
speakers and output connector/jacks. Therefore, although
you can change the sound signal conversion method using
the menu, leaving the Audio Out Select setting to
Bitstream and changing the method according your
purpose temporarily as described on page 48 is
recommended.
For details (tips on using of this function, sampling frequency
and quantization bit conversion table, etc.), see pages 48
and 49.
Bitstream
Normally use this setting.
96k Sound
Select when you wish to listen to sources recorded in the
following frequency/quantization bit in their original sound
quality:
96 kHz/24 bit
96 kHz/20 bit
96 kHz/16 bit
48 kHz/24 bit
For instructions on how to reproduce the above original sounds,
see page 48.
PCM
Select to convert DOLBY DIGITAL sound into the sound
format recordable by equipment such as an MD recorder
connected to the DIGITAL OUTPUT (OPT) connector on
the DVD Receiver (see pages 11 and 49).
AUDIO
Dynamic Range Control
On
Karaoke Vocal
Off
Extended Audio Feature
Off
Audio Out Select
Bitstream