Onkyo DV-SP506 DVD Player User Manual


 
24
Connecting the DV-SP506
—Continued
The following table explains the audio settings for the connection methods shown on the preceding pages.
Note:
While an SACD or DVD-Audio disc is loaded, the HDMI Output Setting, HD Resolution, and HDMI Audio Out
settings cannot be changed. Eject the disc first if you need to change one of these settings.
Audio Settings
Connection method
HDMI Audio
Out setting
(see page 51)
Audio output Notes
11
11
Video and audio
via HDMI
Auto
Audio is output at optimum
quality.
6ch PCM
SACD audio is converted to
6-channel PCM with a sam-
pling rate of 176.4 kHz.
Even if your AV receiver supports DSD,
it may convert it to PCM (44.1 kHz), in
which case this setting may provide
better sound quality.
22
22
Video via HDMI,
audio to AV
receiver via digital
or analog
6ch DSD
Multichannel SACD audio is
output as DSD.
This setting can also be used to enjoy
SACD playback via the multichannel
analog audio output.
2ch PCM
Use this setting to output the
sound through your TV’s
speakers.
If you don’t want to listen through your
TV’s speakers, select Off instead.
Off
Set the Speaker Configura-
tion settings as necessary
(see page 52).
Set the Speaker Configuration settings
to get the best audio experience from
your AV receiver.
33
33
Video directly to
TV, audio to AV
receiver via digital
or analog
2ch PCM
Use this setting to output the
sound through your TV’s
speakers.
Off
Set the Speaker Configura-
tion settings as necessary
(see page 52).
Set the Speaker Configuration settings
to get the best audio experience from
your AV receiver.
44
44
Video and audio to
TV via HDMI
Auto or
2ch PCM
Use this setting to output the
sound through your TV’s
speakers.
2-channel PCM will be fed to your TV
with either the Auto or 2ch PCM setting.
55
55
Video and audio to
TV via analog
Off
Set the Speaker Configura-
tion settings as necessary
(see page 52).
Set the Subwoofer, Center Speaker,
and Surround Speaker settings to Off.
Set the Front Speaker setting to Large.