Onkyo DV-SP506 DVD Player User Manual


 
56
Configuring the DV-SP506
—Continued
On-Screen Display
With this setting you can turn on or off onscreen mes-
sages, such as “Play,” “Stop,” and “Resume.”
On (default):
Onscreen messages are displayed.
Off:
Onscreen messages are not displayed.
On-Screen Display Color
With this setting you can set the color and theme of the
Disc navigation window.
Sapphire (default)
Pearl
Amethyst
Garnet
Background
With this setting you can select the color of the back-
ground that’s displayed when the DV-SP506 is stopped.
Blue
Gray
Graphic (default):
The theme picture specified for
the On-Screen Display Color setting is used.
Screen Saver
With the Screen Saver function you can protect your TV
against screen burn-in, which can occur when the same
image or menu is displayed for a long time.
On (default):
Screen saver on.
Off:
Screen saver off.
When the Screen Saver function is set to On, and play-
back is stopped for 15 minutes, the Screen Saver func-
tion automatically displays a moving image.
Once the screen saver has been activated, you can cancel
it by pressing either the Play [ ] button.
Note:
The Screen Saver function also works with audio CDs,
MP3/WMA, DVD-Audio, SACD discs.
Setting the Parental Lock
With the Parental Lock function you can block access to
certain scenes that the authors have flagged as being
unsuitable for children.
Notes:
Not all discs use parental lock. See the disc’s sleeve
notes for details.
Discs with parental lock may cut certain scenes,
replace certain scenes with children-friendly scenes,
or prevent playback of the entire disc.
Display Menu
Operation Setting Menu
1
Select “Operation Setting” menu
in the setup.
2
Use the Up/Down [ ]/[ ] buttons
to select “Parental Lock,” and
then press the [ENTER] button.
The security code input screen appears.
3
Enter the security code using the
remote controller’s number but-
tons, and then press the [ENTER]
button.
The default security code is “8888.”
You can change the security code in the
next section.
Note:
When entering a security code, you
can use the [CLR] button to delete
the numbers entered so far, if neces-
sary.
4
Use the Up/Down [ ]/[ ] buttons
to change the level of parental
lock, and then press the [ENTER]
button.
At level 8 parental lock is off, with level
1 being the strictest level.
Remote
controller
Remote
controller
Remote
controller