Filter
Top Products
27
Connecting the DV-SP506
—Continued
The following table shows how the video settings affect the video outputs.
Note:
• When the Progressive Setting is set to Progressive, no video will be output by any outputs other than the component
video output. To reset the setting, press and hold down the Previous [ ] button, then press the [ON/STANDBY]
button.
Video Settings
Setting
Video output
HDMI Output Setting (page 49)
On Off
HD Resolution setting (page 46)
Progressive Setting (page 46)
Auto
(default)
480i/576i 480p/576p
720p, 1080i,
1080p
Progressive Interlaced
HDMI
✓
✓
*1
*1 If your TV doesn’t support the HD Resolution settings of 480i/576i, 720p, 1080i, and 1080p, you’ll get no picture.
✓
✓
*1
No output No output
Component
✓
✓✓ ✓
✓
*2
*2 If your TV doesn’t support progressive scanning, you’ll get no picture.
✓
S-Video
✓
✓✓ ✓
No output
✓
Composite
✓
✓✓ ✓
No output
✓
AV CONNECTOR
(European model only)
✓
*3
*3 With the SCART Output Setting, you can choose RGB, S-Video, or composite video for the AV CONNECTOR output. When
RGB is selected, nothing will be output by the component video output (see page 51).
✓✓ ✓
No output
✓