Filter
Top Products
INSTALLATION
15
Connecting to a Receiver/Amplifier with Dolby Digital or DTS Decoder
Coaxial Digital Audio Cable
Rear Panel
AUD
IO/VI
D
EO M
U
LTI-
CHANN
EL
R
E
C
EIVE
R
Receiver/Amplifier with Dolby Digital or DTS Decoder
Coaxial In
Optical In
Optical Digital Audio Cable
Connect one of these cables
Method 7 – Digital Audio Connection
• Please use either a 75-Ohm coaxial digital audio cable with RCA-style connectors or an S/PDIF
optical digital audio cable to connect one of the digital audio outputs to the corresponding input
terminal on your A/V receiver.
NOTE
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.
• Due to copy-control restrictions and bandwidth limitation, full resolution audio output
from DVD-Audio or SACD playback cannot be sent through the coaxial or optical
digital audio output. To listen to DVD-Audio or SACD in full resolution, please use
HDMI or analog audio connections.