Filter
Top Products
SETUP MENU OPTIONS
53
3. LPCM Rate: To set the maximum Linear PCM output frequency. The options are:
• 48K – Supported by most equipment.
• 96K – Allows a higher sampling rate and frequency response. It can result in better audio
quality. Ensure that the receiver/amplifier can support it.
• 192K – Allows the highest sampling rate and frequency response. It can result in the best
audio quality. Ensure that the receiver/amplifier can support it.
4. EQ Type: To set the equalization pattern type. Available options are: None, Rock, Pop, Live,
Dance, Techno, Classic and Soft.
5. Sound Field: To set the sound field effect. Available options are: Off, Concert, Living Room,
Hall, Bathroom, Cave, Arena and Church.
6. Audio Tone (+/-16): This function raises or lowers the tone (key/pitch) of the audio track. This
is useful for playing Karaoke discs and should not be used for regular music listening or movies.
• Press the SELECT button to show the tone control window.
• Press the left/right ARROW buttons to lower or raise the tone/pitch.
• Press the SELECT button to confirm the setting.
7. Pro Logic II: Taking a step further than most DVD players, the OPPO DVD player allows you to
configure Dolby Pro Logic II to expand 2-channel source audio into full 5-channel surround
sound. Note: Pro Logic II functionality is effective only when Speaker Setup Page > Down-
mix is set to “5.1ch” or “7.1ch” and Digital Output is set to “Raw”.
• Press the SELECT button to enter the “Pro Logic II Config” page.
• Press the left ARROW button to exit the “Pro Logic II Config” page.
Pro Logic II
Mode
Panorama
Dimension
Center Width
-- Pro Logic II Config --
Off
Music
Off
00
03
A. Pro Logic II: To turn on or off the Pro Logic II processing. The options are:
• On – Pro Logic II processing is always on
• Off – No Pro Logic II processing
B. Mode: To set the processing mode of Pro Logic II. The options are:
• Music – The surround experience is tailored for multi-channel music playback
• Movie – Emphasis is given to the center channel as two-channel audio is decoded and
played back into your 5.1 system
• Pro Logic – This activates decoding and processing of the original Dolby Pro Logic
processing with mono-surround channel. We recommend using the Dolby Pro Logic
Movie mode in lieu of this 4-channel surround format.
• Auto – Automatically selects processing mode based on the input format