Filter
Top Products
34
Recording
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
Before recording from an external source, see the instructions for the connection on page 33.
Recording from an external source
1. Turn the TV and this unit on, and be sure to select the input of the
TV to which the unit is connected.
Refer to the table on page 15.
2. Press [OPEN/CLOSE
A] to open the disc tray. Place the disc to
record properly.
3. Press [OPEN/CLOSE
A] to close the disc tray.
4. Select the input of the unit which the external equipment is
connected. (L2 or L1)
• To use the input jacks on the back of this unit, select “L1” position by
pressing
[0], [0], [1] on the remote control or the [CHANNEL L / K] .
• To use the input jacks on the front of this unit, select “L2” position by
pressing [0], [0], [2] on the remote control or the [CHANNEL L / K] .
5. Select a recording speed pressing [REC SPEED].
Refer to “Recording speed” on page 24.
6. Press [REC/OTR] on the unit to start
recording.
7. Press “Play” on the external source to
record from.
8. Press [STOP
C] on the unit to stop recording.
POWER
ZOOM
DISPLAY
SETUP
T
OP MENU
MENU/LIST
REC SPEED
REC/OTR
PAUSESKIP SKIP
PL
AY
CM SKIP
REPEAT
OPEN/CLOSE
TIMER
PROG.
FWD
REV
CLEAR
1
2
3
4
5
6
7
8
9
SPACE
0
A
H G
ENTER
CH
RETURN
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
B
C
{
B
K
L
h
g
F
STOP
B
x1.3/0.8
4
Setting a disc to protect
DVD-RW
DVD-RW
VR
To prevent accidental recording,
editing or erasing the titles, you
can protect them from the Setting
menu.
1
Press [SETUP].
2
Using [K / L], select “Disc”.
Press [ENTER].
Disc menu will appear.
3
Using [K / L], select “Disc
Protect OFF ON”. Press
[ENTER].
Confirm window will appear.
4
Using [K / L], select “Yes”.
Press [ENTER].
A disc will be protected.
POWER
ZOOM
DISPLAY
SETUP
T
OP MENU
MENU/LIST
REC SPEED
REC/OTR
PAUSESKIP SKIP
PL
AY
CM SKIP
REPEAT
OPEN/CLOSE
TIMER
PROG.
FWD
REV
CLEAR
1
2
3
4
5
6
7
8
9
SPACE
0
A
H G
ENTER
CH
RETURN
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
B
C
{
B
K
L
h
g
F
STOP
B
x1.3/0.8
1
2
3
4
Note
• The Disc Protect setting is
available only when a disc
with VR mode is inserted.
• You can select only the
Disc Protect menu when a
protected disc is inserted.
To cancel the disc protect:
• When you insert a disc
protected with this unit,
“Disc Protect ON
→
OFF” will
appear instead of “OFF
→
ON”.
To release the protect for the
disc, select “Disc Protect
ON
→
OFF” at step 3, then
select “Yes”.
REC/OTRREC SPEED
OPEN/CLOSE CHANNEL REV FWD STOP PLAY POWER
S-VIDEO VIDEO AUDIO
L R
65
2 3 4 8
This operation may take a while to be recognized.
XP
SP LP
EP
SLPSEP
(1H)
(2H)
(4H)
(6H)(8H)
(10H)
This operation may take a while to be completed.
No
Yes
Disc Protect OFF ON
No
Yes
Disc Protect ON OFF
Settings for an external source (cont’d)