Filter
Top Products
73
Others
Recording Playing discs EditingBefore you start Connections Getting started Others Español
Troubleshooting (cont’d)
Changing the
Setup menu
Symptom Remedy
Playback
The disc does not play. • No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side
facing up.
• The disc is not correctly inserted.
• The unit cannot play certain discs (such as a CD-ROM) (page 37).
• The region code on the DVD-Video does not match the unit (page
37).
• Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on for about two hours until the moisture
evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot play
the disc if it was not finalized (page 35).
Playback image freezes for a
second.
• During the playback of two layered disc, picture may freeze for a
moment when the 1st layer switches to the 2nd layer. This is not a
malfunction.
The disc does not start playback
from the beginning.
• Resume play was activated (page 41). Press
[STOP C] twice.
• You have inserted a disc whose Title menu or DVD menu
automatically appears on the TV screen when it is first insert.
The unit starts playing from the disc
automatically.
• The DVD-Video features an auto playback function.
Some functions such as Stop,
Search, or Slow-motion Play cannot
be performed.
• Depending on the disc, you may not be able to do some of the
operations above. See the instruction manual supplied with the
disc.
The language for the sound track
cannot be changed.
• Multilingual tracks are not recorded on the DVD-Video, DVD-R or
DVD-RW being played.
• The DVD-Video prohibits the changing of the language for the
sound track.
• Try changing the language using the DVD-Video’s menu.
The subtitle language cannot be
changed or turned off.
• Multilingual subtitle are not recorded on the DVD-Video.
• The DVD-Video prohibits changing of the subtitles.
• Try changing the subtitle using the DVD-Video’s menu.
The angles cannot be changed. • Multi-angles are not recorded on the DVD-Video being played.
• The angle-change operation is whenever possible as long as
the disc contains a multi-angle portion. Actual change will be
performed when the portion has come up.
• The DVD-Video prohibits changing angles.
• Try changing the angle using the DVD-Video’s menu.
Recording/Timer Recording/Editing
The channel cannot be changed from
the channel you are recording.
• Set the TV’s input to “TV”.
Recording does not start immediately
after you press
[REC/OTR].
• An unused DVD-R or DVD-RW has been inserted. It takes a while
for the unit to automatically format a DVD-RW.
Nothing was recorded even though
you set the timer setting correctly.
• There was a power failure during recording.
• The unit’s internal clock stopped due to a power failure that lasted
for more than 30 seconds. Reset the clock (pages 21- 22).
• Disconnect the AC power cord from the AC outlet, and connect it
again.
• The program contains copy protection signals that restricts
copying.
• The timer setting overlapped with another setting that was set later
or has priority.
Recording does not stop immediately
after you press
[STOP C].
• It will take a few seconds for the unit to input disc data before
recording can stop.
Timer Recording is not complete or
did not start from the beginning.
• The timer setting overlapped with another setting that was set
previously has priority (page 32).
• Disc space was not enough.