Panasonic AJ-D92P VCR User Manual


 
33
Playback
Preparing for playback
1. Selecting the sound to be
monitored
Use the PHONE SELECT switch to set the
sound which is to be monitored during
playback at the HEADPHONES jack and
EARPHONE jack.
CH 1/2: Sound of CH1 and CH2
CH 3/4: Sound of CH3 and CH4
1
Use the PHONE LEVEL control to adjust the
output audio level.
2
2. Playback in synchronization with
the external signals
Connect the external signal, to which playback is to be
synchronized, to the VIDEO IN connector, and set the
video input selector switch to the VIDEO IN position.
Playback is now initiated in synchronization with the
signal which is connected to the VIDEO IN connector.
<Notes>
O
If the VIDEO IN connector’s signal is disconnected
and re-connected during playback, the playback
picture may be disturbed.
O
It is recommended that a signal complying with the
RS-170A standard be used as the reference signal
for playback.
VIDEO IN connector
Video input selector switch
1
2