Panasonic AJ-D92P VCR User Manual


 
36
Playback
3. Linear 0.3
aa
speed playback
The slow still mode is established when the SEARCH
button is pressed during still-picture playback (PLAY
PAUSE).
Linear 0.3
a
speed playback is performed by pressing
the FF or REW button in this mode.
When the PAUSE/STILL button is pressed during the
linear 0.3
a
speed playback, the tape is temporarily
stopped.
Linear 0.3
a
speed playback is restored when the
PAUSE/STILL button is pressed again.
<Note>
Noise appears during linear 0.3
a
speed playback.
When the optional AJ-A95 remote controller is
connected to the REMOTE connector, variable speed
playback is enabled by operating the search dial on
the AJ-A95.
<Notes>
O
Noise appears on the screen during playback at
any tape speed except the normal tape speed (1
a
).
O
During variable speed playback, the sound
recorded on the analog cue track is played back.
Transfer of VTR
operation
VTR operating
mode
Function button
PAUSE/STILL PLAY PAUSEPLAY
PLAY PLAY
STOP STOP
Any mode
STOP FF FF
STOP
REW REW
Any mode
PAUSE/STILL or
PLAY
PLAY
SEARCH Slow still
PLAY PAUSE
PLAY PLAY
FF FWD slowSlow still
REW REV slow
PAUSE/STILL,
SEARCH or FF
FWD slow
REW REV slow
FWD slow still
PAUSE/STILL,
SEARCH or REW
REV slow
FF FWD slow
REV slow still
REW REV slow
SEARCH or
PAUSE/STILL
FWD slow still
FWD slow
FF FWD slow
SEARCH or
PAUSE/STILL
REV slow still
REV slow
4. Variable speed playback
(When AJ-A95 is connected)