Filter
Top Products
15
Operating the menu items of the selected remote camera
The menu operations of the remote cameras can be operated from the unit for the remote camera which is now selected.
The CAMERA OSD button, F1 dial and F2 dial are used to perform the operations.
When the CAMERA OSD button is held down, its indicator lights, and the on-screen menu of the selected remote camera is
displayed as the output image of the remote camera.
When the button is held down again while its indicator is lighted, the menu is cleared, and the indicator goes off.
POWER ALARM F1 CAMERA
OSD
R/B GAIN R/B PED
SYSTEMSETUPCAMERA
SCENE/MODE
DETAIL
DELETESTORE
PAGEMENU F2 EXIT
USER2USER1
PRESET MEMORY / MENU
GAIN/PED
F2
F1
123
AWB/ABB
4
SHUTTER
5
678910
Table of operations
Remote camera Menu ON/OFF Dial operation Menu operation
AW-HE50
Hold down the
CAMERA OSD
button.
Turn the F1 dial.
(Turn it clockwise.)
Moves (downward) to an item.
Changes (increments) the setting.
Turn the F1 dial.
(Turn it counterclockwise.)
Moves (upward) to an item.
Changes (decrements) the setting.
Press the F1 dial. Enters the setting.
AK-HC1500
AK-HC1800
AW-HE870
Hold down the
CAMERA OSD
button.
Turn the F1 dial.
(Turn it clockwise.)
Moves (downward) to an item.
Changes (decrements) the setting.
Turn the F1 dial.
(Turn it counterclockwise.)
Moves (upward) to an item.
Changes (increments) the setting.
Press the F1 dial. Enters the setting.
AW-E350
AW-E650
AW-E750
AW-E860
AW-HE100
Hold down the
CAMERA OSD
button.
Turn the F1 dial.
(Turn it clockwise.)
Moves (downward) to an item.
Turn the F1 dial.
(Turn it counterclockwise.)
Moves (upward) to an item.
Press the F1 dial. Enters the setting.
Turn the F2 dial.
(Turn it clockwise.)
Enters the setting.
Changes (increments) the setting.
Turn the F2 dial.
(Turn it counterclockwise.)
Changes (decrements) the setting.
The “on” and “off” of the indicator in the CAMERA OSD button may not correspond exactly to the menu display and
menu non-display when another remote camera has been selected while remote camera menu operations are being
performed from the unit or when the CAMERA OSD function is set to OFF by a remote camera.
In addition, the menu operations may not be performed properly.
The operations differ depending on the remote camera model.
For details on the menu items which are displayed, check the Operating Instructions of the model concerned.
Notes