Filter
Top Products
35
Checking the equipment alarm information
It is possible to check the alarm statuses of the unit and
the remote cameras assigned to the CAMERA STATUS/
SELECTION buttons.
1 Set the MENU button to ON.
Press the MENU button to light its indicator.
2 Set PRESET MEMORY/MENU 10 button
(SYSTEM) to ON.
When the button is pressed and its indicator is lighted,
the [SYSTEM] menu is displayed on the LCD panel.
[1]CAMERA CTL ▼
3 Turn the F1 dial to display the ALARM menu,
and press the F1 dial.
[10]ALARM
1.POWER ▼
No ALARM
Press the F1 dial.
4 Turn the F1 dial to select the unit (POWER) or
remote camera item (CAM1 to CAM100).
The alarm status is displayed underneath.
2.CAM1
FAN ALM
1.POWER ▼
No ALARM
Turn the F2 dial.
[Select POWER]
The unit’s power supply alarm can be checked.
No ALARM:
When the power supply is trouble-free.
ALARM:
When trouble has occurred in the power supply.
[Select CAM1 to CAM100]
The alarm statuses of the remote cameras currently
assigned to the CAMERA STATUS/SELECTION buttons
are displayed.
No ALARM:
Trouble-free.
FAN ALM:
Trouble has occurred in the cooling fan.
P/T ALM:
Trouble has occurred in the pan/tilt operation.
FAN ALM+P/T ALM:
Trouble has occurred in the cooling fan and pan/tilt
operation.
When an alarm has occurred, stop operation
immediately, and be absolutely sure to contact your
dealer.
Continued use may cause the unit to malfunction.
Note