Filter
Top Products
24
Setting the functions
Controlling the peripheral
devices connected to the
remote cameras
When any of the peripheral devices listed below are
connected to the remote cameras, they can be controlled.
• ND filter
• AC adapter
(AW-PS300A)
• Defroster
• Wiper
• Heater, fan
• Halogen lamp
Control is exercised using the FUNCTION item of the
[SETUP] menu.
[6]FUNCTION
Controlling an ND filter
This item is used to control the ND filter when using a lens
with an ND filter function on the currently selected remote
camera.
From the [SETUP] menu, select [FUNCTION] and display
[ND FILTER]. Then select ND filter control.
1.ND FILTER
Off
Controlling an AC adapter (AW-PS300A)
This item is used to control shorting and releasing of the
OPTION SW CONTROL OUT connector when using an
AC adapter (AW-PS300A) for the currently selected remote
camera.
From the [SETUP] menu, select [FUNCTION] and display
[OPTION]. Then select shorting or releasing.
2.OPTION
Off
Controlling a defroster
This item is used to control a defroster when using a remote
camera (AW-PH650 + camera) equipped with a defroster
function as the currently selected remote camera.
From the [SETUP] menu, select [FUNCTION] and display
[DEFROSTER]. Then select defroster On or Off.
3.DEFROSTER
Off
Controlling a wiper
This item is used to control a wiper when using a remote
camera (AW-PH650 + camera) equipped with a wiper
function as the currently selected remote camera.
From the [SETUP] menu, select [FUNCTION] and display
[WIPER]. Then select wiper On or Off.
4.WIPER
Off
Controlling a heater/fan
This item is used to control a heater/fan when using a
remote camera (AW-PH650 + camera) equipped with a
heater or fan function as the currently selected remote
camera.
From the [SETUP] menu, select [FUNCTION] and display
[HEATER/FAN]. Then select heater/fan On or Off.
5.HEATER/FAN
Off
Controlling a halogen lamp
This item is used to control the lighting (On) and
extinguishing (Off) of the halogen lamp when a halogen
lamp has been connected to the currently selected remote
camera.
From the [SETUP] menu, select [FUNCTION] and display
[LAMP]. Then select halogen lamp lighting (On) and
extinguishing (Off).
6.LAMP ▲
Off