Filter
Top Products
Editing
34
VQT0N92
You can perform various kinds of title editing.
Preparation
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Press [DVD].
[1] Press [DIRECT NAVIGATOR] and use [3, 4, 2,
1] to select a desired title.
≥“To show other pages” l 33
≥“Multiple editing” l 33
[2] Press [SUB MENU].
[3] Select “Edit Title” with [3, 4] and
press [ENTER].
[4] Use [3, 4] to select a desired item
and press [ENTER].
≥
The editing screen for the selected item appears.
∫To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN].
[RAM] [-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “Edit Title”.
[4] Select “Title Name” with [3, 4] and press
[ENTER].
Refer to “Entering text”. (l 32)
[RAM] (Multiple editing l 33)
≥Follow steps 1 to 3 of “Edit Title”.
You can prevent accidental erasure of titles by setting and canceling
the write-protection.
[4] Select “Setup Protection” or “Cancel
Protection” with [3, 4] and press [ENTER].
[5] Select “Yes” with [2] and press [ENTER].
For your reference
Titles will be erased even if they are protected if you format the disc
with DISC MANAGEMENT (l 31).
[RAM]
≥Follow steps 1 to 3 of “Edit Title”.
You can remove unnecessary parts of the title such as commercials.
[4] Select “Shorten Title”
with [3, 4] and press
[ENTER].
[5] Press [ENTER] at the
start point and end
point of the section
you want to erase.
(l 35, “For quicker editing”)
[6] Select “Exit” with [3,
4] and press [ENTER].
[7] Select “Erase” with [2]
and press [ENTER].
∫To erase another part of the same title
After setting the point in “Start” and “End”, select “Next” in step 5 and
perform step 7, then repeat steps 5–7.
For your reference
≥You may not be able to specify start and end points within
3 seconds of each other.
≥The disc’s available recording time may not increase after erasing
short parts of titles.
[RAM] [-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “Edit Title”.
You can change the image to be shown as a thumbnail picture in the
Title View.
[4] Select “Change
Thumbnail” with
[3, 4] and press
[ENTER].
[5] Press [1, PLAY] to
play.
[6] Press [ENTER] at the
point you want to
display.
(l 35, “For quicker editing”)
≥To change to another point in the same title:
- Select “Change” with [3, 4] and press [1, PLAY] and then
repeat step 6.
[7] Select “Exit” with [3, 4] and press [ENTER].
≥The thumbnail picture will be changed at this point.
1 Edit Title
11 Title Name
11 Setup Protection/Cancel Protection
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
S
SCHEDULE
DVD ERASE
REC
REC MODE
ADD/DLT
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
STATUSDISPLAY
SUB MENU
VCR Plus+
JET REW
SKIP/INDEX
PLAY
DIRECT NAVIGATOR
TOP MENU
RETURN
S
SUB MENU
OPERATION
SELECT
POWER
VOLUME
CH
INPUT SELECT
TV
TV/VIDEO
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
DVD
DVD
RETURN
DIRECT NAVIGATOR
SUB MENU
3, 4, 2, 1
ENTER
:, 9
1
Setup Protection
Cancel Protection
Shorten Title
Change Thumbnail
Divide Title
Title Name
e.g.: DVD-RAM
Cancel Protection:
The padlock mark
disappears.
DIRECT NAVIGATO
R
DVD-RAM
--
07
10 10/25 Mon
Setup Protection
Set title protection.
Yes No
ENTER
Set up Protection:
The padlock mark
appears.
DIRECT NAVIGATO
R
DVD-RAM
--
07
10 10/25 Mon
Cancel Protection
Cancel title protection.
Yes No
ENTER
11 Shorten Title
11 Change Thumbnail
DIRECT NAVIGATOR Shorten Title
DVD-RAM
Start
Next
Exit
0:43.21
Play
08
End
- -:- -.- - - -:- -.- -
Start End
ENTER
Shorten Title
Erase Cancel
0 : 58(SP)
Corresponding playlist chapters will be erased.
Time remaining after erase
DIRECT NAVIGATOR Change Thumbnail
DVD-RAM
Change
Exit
0:00.00
0:00.00
Change
08
;
ENTER
Start play and select
the thumbnail position.
DVD
ES30VP&PC.book 34 ページ ２００５年２月２１日 月曜日 午後２時３２分