Filter
Top Products
Recording
53
VQT0N92
≥When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before scheduled
recording starts.
[1] Press [SCHEDULE].
≥Make sure “NEW SCHEDULED RECORDING” is selected.
[2] Press [ENTER] to move and change the items
using [3, 4, 2, 1].
≥You may also use the numeric buttons to enter “CH”.
≥CH (Program Position/TV Station Name)
≥DATE
You can also make a daily or weekly program.
≥ON (start time)/OFF (finish time)
The time increases or decreases in 30-minute increments if
you hold down the button.
≥Recording mode
You can also press [REC MODE] to change the recording
mode.
SP,.EP,.VP,.A
°,.SP... (l 51)
° Auto SP/EP mode (l right)
[3] Press [ENTER] when you have finished making
changes.
≥“ ” lights on the unit’s display.
≥“INVALID ENTRY” is displayed when you enter the wrong item.
Reenter the item.
≥To continue programming:
Select “NEW SCHEDULED RECORDING” and repeat steps
2–3.
[4] Press [RETURN].
Note
≥“ ” and “1” flashes when the unit cannot perform scheduled
recording (e.g., video cassette with no accidental erasure
prevention tab or no video cassette in the cassette compartment).
≥The actual time recorded may be longer than the program itself
when TV programs are recorded using VCR Plus_ system.
≥If you set (l 46) “DST” (Daylight Saving Time) to “ON” when
manually setting the clock, scheduled recording may not work
when summer switches to winter and vice versa.
∫To stop recording while a program is working
Press [∫, STOP], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the VHS of the main unit for 3
or more seconds to stop recording.
If, at the beginning of a scheduled recording, there is not enough
tape remaining to complete the recording, the SP/EP function will
automatically run the tape at EP speed for recording. This ensures
that the entire program will be recorded. If EP mode is not enough to
stretch the remaining tape to fit the whole program you will not be
able to record the whole TV program.
≥It is not possible to automatically activate VP mode.
≥The tape length must be set correctly. (l 54)
≥Some tapes may not work correctly.
≥If the recording mode changes from SP to EP during a scheduled
recording, some picture distortion occurs at that point.
≥Even when the unit is turned off, you can display the scheduled
recording list by pressing [SCHEDULE].
Preparation
≥Press [VHS].
[1] Press [SCHEDULE].
[2] Press [3, 4] to select a program.
[3] Press [CANCEL/RESET, ¢] to delete,
You cannot delete programs that are currently recording.
or press [ENTER] to change.
The scheduled recording setting screen appears.
[4] If you press [ENTER] in step 3
Use [3, 4, 2, 1] to change and press [ENTER].
[5] Press [RETURN].
For your reference
≥Programs that failed to record are not deleted from the list
immediately, but are deleted from the list automatically at 4 a.m.
2days later.
∫ Manual programming
CH DATE ON OFF
25 13WE 10:12 AM 10:30 AM S P
NEW SCHEDULED RECORDING
NEW SCHEDULED
RECORDING is
selected.
SCHEDULED
RECORDING
R 2 : 00 SP
10/13 WE 10:12 AM
CH DATE ON OFF
ss ssss s : ss s : ss s s
Auto SP/EP mode
Check, change or delete programs
Scheduled recording
Video tape (e.g.: 60-minute cassette)
1st program
(30 min.)
30 min. at SP
2nd program (60 min.)
15 min.
at SP
45 min.
at EP
CH DATE ON OFF
6 SA 11:00 PM 12:00 PM S P
25 13WE 10:12 AM 10:30 AM S P
NEW SCHEDULED RECORDING
VHS
Recording
ES30VP&PC.book 53 ページ ２００５年２月２１日 月曜日 午後２時３２分