Filter
Top Products
Editing
35
VQT0N92
[RAM]
≥Follow steps 1 to 3 of “Edit Title”.
You can divide a selected title into two. You must be careful when
dividing a title because it cannot be recovered after the procedure.
[4] Select “Divide Title”
with [3, 4] and press
[ENTER].
[5] Press [ENTER] at the
point you want to divide
the title.
(l lower right, “For quicker
editing”)
≥To change the point to
divide:
- Select “Divide” with [3, 4]
and press [1, PLAY], and
then repeat steps 5–7.
[6] Select “Exit” with [3, 4] and press [ENTER].
[7] Select “Divide” with [2] and press [ENTER].
≥The title is divided at that point.
∫To check the division point
By selecting “Preview” in step 5 and pressing [ENTER], play will begin from
10 seconds prior to the division point to 10 seconds after the division point.
For your reference
≥The divided titles retain the name of the original title. They also
retain the CPRM property (l 64) of the original.
≥Video and audio just before and after the division point will be
momentarily cut out.
≥It is not possible to carry out “Divide” in the following cases:
-
When the resulting part(s) are extremely short.
-
When the total number of titles is more than 99.
[RAM] [-R] [-RW‹V›] [+R]
[1] Press [DIRECT NAVIGATOR] and use [3, 4, 2,
1] to select a desired title.
≥“To show other pages” l 33
[2] Press [SUB MENU].
[3] Select “View Chapters” with [3, 4]
and press [ENTER].
[4]
Select a desired chapter with [
3
,
4
,
2
,
1
].
≥To start play l Press [ENTER].
≥To edit l Follow the steps below.
[5] Press [SUB MENU].
[6] Select a desired item with [3, 4]
and press [ENTER].
[RAM] (Multiple editing l 33)
≥Follow steps 1 to 5 of “View Chapters”.
Once erased, the recorded contents are lost and cannot be
restored. Make certain before proceeding.
[6] Select “Erase Chapter” with [3, 4] and press
[ENTER].
[7] Select “Erase” with [2] and press [ENTER].
[RAM]
≥Follow steps 1 to 5 of “View Chapters”.
[6] Select “Create Chapter” with [3, 4] and press
[ENTER].
[7] Press [ENTER] at the point you want to divide.
(l below, “For quicker editing”)
≥Repeat this step to divide at other points.
[8] Select “Exit” with [4] and press [ENTER].
Note
≥A short portion of the recording just after the creation point may be
lost.
For your reference
≥The divided titles retain the name of the original title. They also
retain the CPRM property (l 64) of the original.
≥It is not possible to carry out “Create” when the resulting part(s) are
extremely short.
[RAM]
≥Follow steps 1 to 5 of “View Chapters”.
[6] Select “Combine Chapters” with [3, 4] and
press [ENTER].
[7] Select “Combine” with [2] and press [ENTER].
≥The selected chapter and next chapter are combined.
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
≥Follow steps 1 to 5 of “View Chapters”.
[6] Select “View Titles” with [3, 4] and press
[ENTER].
You go back to Title View.
11 Divide Title
1 View Chapters
DIRECT NAVIGATOR Divide Title
DVD-RAM
Preview
Divide
Exit
0:00.05
0:00.05
Divide
08
;
ENTER
Divide Title
Divide Cancel
Once divided, this title
cannot be recombined.
Create Chapter
Combine Chapters
View Titles
Erase Chapter
e.g.: DVD-RAM
Title/Chapter
Programs are recorded as a single title consisting of one chapter.
Title
Chapter
You can divide a title into multiple chapters. [RAM]
(l 22, “Create chapters”, l right “Create Chapter”)
Title
Chapter Chapter Chapter Chapter
≥You can change the order of chapters and create a playlist.
[RAM]
≥Titles are divided into chapters about 5 minutes after finalizing
(l 31). [-R] [-RW‹V›] [+R]
Start End
11 Erase Chapter
11 Create Chapter
11 Combine Chapters
11 View Titles
For quicker editing
≥Use search (l 21), Time Slip (l 22) or slow-motion (l 21) to
find the desired point.
≥Press [:, SKIP] or [9, SKIP] to skip to the end of a title.
Erase Chapter
Erase Cancel
Erase chapter from the title?
Corresponding playlist chapters will also be erased.
DIRECT NAVIGATOR Create Chapter
DVD-RAM
Create
Exit
0:43.21
PLAY
08
Combine Chapters
Combine Cancel
Combine chapters.
Selected Chapter Following Chapter
001 002
ENTER
DVD
Editing
ES30VP&PC.book 35 ページ ２００５年２月２１日 月曜日 午後２時３２分