Filter
Top Products
Reference
65
VQT0N92
Set up Page
Disc Page
Recording Page
Frequently asked questions
What equipment is necessary to
play multi channel surround
sound?
≥DVD-Video:
You can play DVD-Video multi channel surround by digitally connecting an amplifier
equipped with a Dolby Digital and a DTS decoder.
≥DVD-Audio:
This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.
15
–
Can the headphones and speakers
be directly connected to the unit?
≥You cannot directly connect to the unit. Connect through the amplifier etc. 15
The TV has both S-VIDEO IN
terminal and COMPONENT VIDEO
IN terminals. Which terminal should
I connect with?
≥We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the
color difference signals (P
B/PR) and luminance signal (Y) separately in order to achieve
high fidelity in reproducing colors. If the TV is compatible with progressive output, a high
quality picture can be output because the unit’s component video output terminal outputs
a progressive output signal.
15
Is my TV progressive output
compatible?
≥All Panasonic TVs that have 480p input terminals are compatible. Consult the
manufacturer if you have another brand of TV.
–
Can I play DVD-Video, DVD-Audio
and Video CDs bought in another
country?
≥You can play them if the video standard is NTSC.
≥However, you cannot play DVD-Video if its region number does not include “1” or “ALL”.
–
7
Can a DVD-Video that does not
have a region number be played?
≥The DVD-Video region number indicates the disc conforms to a standard. You cannot
play discs that do not have a region number.
–
Please tell me about DVD-R, DVD-
RW, +R and +RW compatibility with
the unit.
≥The unit records and plays DVD-R, DVD-RW (DVD-Video format) and +R, and plays
DVD-RW (DVD Video Recording format) and +RW.
≥The unit also records and plays high speed recording compatible DVD-R, DVD-RW, +R
discs.
6, 7
6
Please tell me about CD-R and
CD-RW compatibility with the unit.
≥This unit plays CD-R/CD-RW discs which have been recorded in one of the following
standards: CD-DA, Video CD, MP3 and still pictures (JPEG/TIFF). Close the session or
finalize the disc after recording. This unit can recognize up to 99 folders (groups) and 999
files (tracks) on a disc with MP3 or still pictures (JPEG/TIFF).
≥You cannot write to a CD-R or CD-RW with the unit.
7, 23,
24
7
Can I record from a commercially
purchased video cassette or DVD?
≥Most commercially sold video cassettes and DVD are copy protected; therefore,
recording is usually not possible.
–
Can DVD-R, DVD-RW (DVD-Video
format) and +R recorded on the unit
be played on other equipment?
≥You can play on compatible equipment such as DVD players after finalizing the disc on
this unit. However, depending on the condition of the recording, the quality of the disc and
capabilities of the DVD player, play may not be possible.
31
Can I record digital audio signals
using the unit?
≥You cannot record digital signals. The digital audio terminals on the unit are for output
only.
–
Can a digital audio signal from the
unit be recorded to other
equipment?
≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio
Output” settings to the following from the SETUP menu.
-
PCM Down Conversion “On”
-
Dolby Digital “PCM”
-
DTS “PCM”
However, only
-
As long as digital recording from the disc is permitted.
-
As long as the recording equipment is compatible with 48 kHz of sampling frequency.
≥You cannot record MP3 signals.
44
–
Can I switch to SAP during
recording?
≥With DVD-RAM, you can, and the audio recorded also changes. Just press [AUDIO].
≥With DVD-R, DVD-RW (DVD-Video format), +R you cannot. Change before recording
with “Select MTS” in the SETUP menu.
25
44
VHSDVD
Reference
ES30VP&PC.book 65 ページ ２００５年２月２１日 月曜日 午後２時３２分