Filter
Top Products
54
VQT0N92
Convenient functions
The unit automatically records special index signals on the tape
every time a recording is started. The index search function makes
use of these index signals to let you find the beginning of a desired
program quickly and easily.
Preparation
≥Select the unit viewing channel on the TV.
≥Press [VHS].
≥Insert a recorded video cassette.
While stopped or during normal play
Press [: ] or [ 9].
≥Each press increases the number of skips.
∫To cancel the index search
Press [∫, STOP].
Note
≥You can search up to 20 index signals can be searched for in both
directions.
≥When you press either one of the buttons too much, you can
control the number of skips by pressing the opposite button.
≥The figure on the display decreases by 1 each time an index signal
is located.
≥This feature may not work correctly if the index signals are too
close together. Make recordings of at least 5 minutes.
[1] While stopped
Press [VHS MENU].
[2] Use [3, 4] to select a desired item.
[3] Use [2, 1] to change the setting.
∫To exit the settings screen
Press [VHS MENU].
This description shows the initial settings for the unit. For
details on menu operation (l above).
≥ Underlined items are the factory default settings.
∫VHS MENU
OSD
(l 55)
[ON
] [OFF]
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time.
[T120
] [T160] [T180]
[T120]: T30, T60, T90 and T120 tapes
[T160]: T140 and T160 tapes
[T180]: T180 tapes
BLUE BACK
[ON] [OFF]
JET SEARCH (l 49)
Set the speed for JET SEARCH when playing EP and VP tapes.
≥It is possible to view the picture recorded in EP or VP mode at
approx. 27 or 35 times speed.
[k27] [k35
]
≥Select [k27] if the picture is poor at [k35].
VHS Index Search System (VISS)
∫Index signals are recorded in the following cases.
≥When a recording is started by pressing [¥, REC].
≥When scheduled recording is started.
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
S
SCHEDULE
OPERATION
SELECT
DVD ERASE
REC
REC MODE
ADD/DLT
POWER
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
VHS MENU
RETURN
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
STATUSDISPLAY
AUDIO
TV
TV/VIDEO
VHS
DVD
TRACKING/V-LOCK
SUB MENU
DVD/VHS POWER
VCR Plus+
COPYING
VHS DVD
CREATE
CHAPTER
VCR/TV
JET REW
SKIP/INDEX
REC
TOP MENU
VHS MENU
VHS
RESET
VHS
VHS MENU
AUDIO
STATUS
∫
3, 4, 2, 1
:, 9
µ
STATUS
AUDIO
Changing the unit’s settings
Preparation
≥Select the unit viewing channel on the TV.
≥Press [VHS].
∫ Common procedures
1 Summary of settings
ON Messages appear on the TV screen for about
5 seconds after you perform operations.
≥The on-screen display will always appear on the TV
screen during rewind, Jet Rewind and fast forward.
OFF Messages do not appear.
ON The screen shows a blue background when you play
unrecorded portions.
OFF The blue background function does not work.
VHS MENU
SELECT
END
: j/i:
: VHS MENU
OSD ¥ ON OFF
TAPE SELECT
¥ T120 T160 T180
BLUE BACK
¥ ON OFF
JET SEARCH t 27
¥ t 35
VHS
ES30VP&PC.book 54 ページ ２００５年２月２１日 月曜日 午後２時３２分