Filter
Top Products
16
Recording
≥Select the unit viewing channel (or the AV input) on the TV.
≥Press [VHS].
≥Check that the clock is set to the correct time. If it has not been set, refer to page 12.
[1] Insert a video cassette tape with an intact erasure
prevention tab.
[2] Press [CH]JI buttons to select the TV station.
≥If you keep pressing these buttons, the channels changes quickly.
≥You can also select the channels with the numeric buttons.
Example: “5”; [5]
“15”; [– /– –]l[1]l[5]
[3] Press [REC MODE] to select the recording mode.
Each time you press the button:
SP>LP>EP>SP
[4] Press [REC¥] to start recording.
¬ To stop recording
Press [∫].
¬ To interrupt recording
Press [;/D] during recording. Press it again to continue recording.
Notes:
≥Even if the tape you use is labeled “S-VHS”, it is not possible to record in the S-VHS system with this
unit. It records in normal VHS system.
≥You cannot change channels while recording. You can change channels while in the pause mode.
≥When the recording is paused for more than 5 minutes, the unit returns to the stop mode.
You can watch another TV programme or play discs while recording. The recording will not be affected.
ªTV
1) Press [CH]JI to select the desired TV programme.
ªDVD
1) While recording, press [DVD].
2) If “OUT [VHS/DVD]” is set to “MANUAL” (l 12)
, press [VHS/DVD OUTPUT] to switch to DVD.
3) Insert the disc and press [ 1] (PLAY) to start play.
(l 26)
CH
INPUT
SELECT
VHS
CANCEL/RESET
VHS
SLOW/
SEARCH
REW
FF
VHS/DVD
INDEX/SKIP
PLAY
TRACKING/V-LOCK
JET REW
CH
AV
VOLUME
DVD
PLAY LISTDIRECT NAVIGATOR
TOP MENU
RETURN
DISPLAY
PLAY MODE
REC MODE
VHS/DVD
QUICK REPLAY
AUDIO
REC
ENTER
PLAY SPEED
P.MEMORY
SLOW
-/-
--/-
-
MENU
AV ENHANCER
PROG/CHECK
SET UP
I-TIMER
TIMER
DVD-RAM
DUBBING
PROG PLAY
INPUT SELECT VHS STATUS
DVD STATUSPICTURE MODEGROUP
NAVI
REC
MODE
REC
MENU
ENTER
Numeric
buttons
VHS
CANCEL/RESET
SLOW/
SEARCH
REW
FF
VHS/DVD
INDEX/SKIP
PLAY
TRACKING/V-LOCK
CH
AV
VOLUME
DVD
VHS/DVD
AUDIO
PLAY SPEED
SLOW
-/-
--/-
-
MENUNAVI
VHS/DVD
OUTPUT
DVD
CH
VHS
Recording mode
SP: Provides standard recording time, optimum picture and sound quality.
LP: Provides double recording time with slightly reduced picture and sound quality.
EP: Provides triple recording time with slightly reduced picture and sound quality.
≥When you play back a tape recorded in the EP mode, the monaural sound may be unstable.
≥When you start the recording in the EP mode, “EP” indication on the unit’s display flashes for about 8
seconds.
Using another device while recording
SP
VP32GL.book 16 ページ ２００４年６月１１日 金曜日 午後４時３２分