Filter
Top Products
VHS
Operations
Recording
17
You can start recording quickly and set a duration.
..............................................................................................................................................................................................................................................................................................................................
During recording, press [¥REC/OTR] on the unit repeatedly.
Select the desired recording duration.
≥Each time you press the button, the indication on the unit’s display changes as follows:
Counter display (normal recording mode)>OFF 30 (min.)>OFF 60 (min.)>OFF 90 (min.)>
OFF 120 (min.)>OFF 180 (min.)>OFF 240 (min.)>Current time (normal recording mode)
≥The unit will automatically switch off when OTR is completed.
¬ To stop OTR at any time
Press [∫] or [Í/I] (VHSÍ).
Notes:
≥The OTR function works during normal recording only.
≥When the tape reaches its end during OTR, the unit will turn itself off.
You can record from other video sources (VHS, camera, etc.).
≥Connect the other equipment to this unit as shown. If audio output on the other equipment is
monaural, use a stereo-monaural conversion cable (not supplied).
≥Insert a recorded cassette tape with an intact erasure prevention tab.
≥Set A1 or A2 with [INPUT SELECT] to select the audio/video source required.
..............................................................................................................................................................................................................................................................................................................................
[1] Press [1] (PLAY).
Find the recording start point.
..............................................................................................................................................................................................................................................................................................................................
[2] Press [;/D], then press [REC¥].
Put the unit in the recording standby mode.
..............................................................................................................................................................................................................................................................................................................................
[3] Start play on the other equipment.
..............................................................................................................................................................................................................................................................................................................................
[4] Press [;/D] to start recording.
¬ To stop recording
Press [∫].
You can delete all contents in a cassette’s (the picture, the sound and the Jet Navigator data).
..............................................................................................................................................................................................................................................................................................................................
[1] Insert a cassette that you want to delete the cassette’s
contents.
..............................................................................................................................................................................................................................................................................................................................
[2] Press [MENU] to display the main menu on the screen.
..............................................................................................................................................................................................................................................................................................................................
[3] Press [34] to select the “TAPE REFRESH”, and press
[ENTER].
..............................................................................................................................................................................................................................................................................................................................
[4] Press [ENTER] for 2 seconds or more to start the tape
refresh function.
The tape refresh function starts.
≥The tape is rewound to the beginning, and it is fast-forwarded with erasing the tape.
≥When the tape reaches the end, this unit automatically rewinds it to the beginning.
Note:
≥When a video cassette with a broken erasure prevention tab is inserted, this function is not
activated.
One-Touch Recording (OTR)
/ I
EJECT
FULL-OPEN
PLAY
/REW FF/
STOP
CH
REC/OTR
LR
j
AUDIO
j
VIDEO
AV2 IN
REC/OTR
STOP
Recording from an external source
AUDIO
OUT
LR
VIDEO
OUT
R-AUDIO-L
VIDEO
R-AUDIO-L
VIDEO
VHS/DVD
OUT
AV1 IN
/ I
EJECT
FULL-OPEN
PLAY
/REW FF/
STOP
CH
REC/OTR
LR
j
AUDIO
j
VIDEO
AV2 I N
AV2 IN (AUDIO/VIDEO)
AV1 IN (AUDIO/VIDEO)
Other VHS or Video
movie camera
(Not supplied)
TAPE REFRESH
ª For recordings while “JET NAVIGATOR” is set to “ON”
Be sure to set “JET NAVIGATOR” to “ON” (OPTION l 24).
ª For recordings while “JET NAVIGATOR” is set to “OFF” or
recordings on another VHS
Be sure to set “JET NAVIGATOR” to “OFF” (OPTION l 24).
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
SELECT
END
: , ENTER
:MENU
VHS MENU
TAPE REFRESH
START:ENTER
END:STOP
VP32GL.book 17 ページ ２００４年６月１１日 金曜日 午後４時３２分