19
Getting Start ed
How to connect the AV OUT Terminals
Or
Installation
Recording Equipment
(S-VHS /VHS VCR)
S-VIDEO
VIDEO
AUDIO
You can connect a VCR to the AV OUT terminal to record the program you are viewing on-screen. An
external monitor can also be connected to the AV OUT terminals. Connect the VCR as shown below.
Notes:
• This unit contains Video and Audio Outputs for the purpose of recording television programming to VCR. Due to license restrictions,
if a device (STB, DVD, etc.) is connected to the HDMI input of the unit, no video or audio output is allowed.
• AV Out signal is available when receiving digital channel. However, all formats will be down converted to NTSC.
• Never connect the VIDEO IN and OUT terminals to the same video recorder, as this could cause incorrect operation.
• Even if unit is in Split or PIP mode, OUT terminals only output the main picture and sound signals. A sub-picture, including
channel search, etc., will not be output.
• AV terminals will not output Y, PB, PR, RGB/HDMI IN or SD/PC card signals.
• The S-Video OUT terminal outputs the same signal that is input from the S-Video IN terminal and Digital RF channels.
• Certain program content output from the AV Out connector may have the Macrovision signal modifi cation applied to its signal,
preventing VCRs from recording this video signal.