Panasonic PT 60LCX63 Projection Television User Manual


 
21
Getting Start ed
OPTICAL
Manufactured under license
from Dolby Laboratories. “Dolby”
and the double-D symbol are
trade marks of Dolby
Laboratories.
Firmly connect
the cable to
the connector.
Connect three
or more
speakers for
surround
sound.
Speakers (example)
Use the diagram below to connect the Digital Audio Output of your Device Display to a Dolby Digital
decoder.
Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides ve discrete
full-bandwidth channels for front left, front right, center, surround left and surround right, plus a LFE (Low Frequency
Effect) subwoofer channel, For a full Home Theater sound experience, an external Dolby Digital decoder and a
multichannel ampli er must be connected to the Digital Audio Out jack on the unit.
Procedure
Connect the Digital Audio cable from the Digital Audio
Out jack on the unit to the Digital Audio In connection on
the Dolby Digital decoder.
Note:
When ATSC channel is selected, the output from the Digital
Audio Out jack will be Dolby Digital. But, if NTSC channel is
selected, the output will be PCM.
Digital Audio Out
Ampli er with built in
Dolby Digital decoders.
Installation