Filter
Top Products
FEATURES OF THE SET-TOP BOX
480p
If your TV is capable of displaying 480p format only, then set the OUTPUT MODE
switch to 480p.
1080i
720p 480p
480p
480i
NTSC Mode
If your TV is capable of displaying NTSC format only, then set the OUTPUT MODE
switch to NTSC.
1080i
720p 480i
480p
480i
Note: When the mode switch is in the NTSC position, the output format will be 480i
(component) and 480i (composite).
Aspect Ratio Selection
The STB changes the normal aspect ratio (picture display shape) in response to the
source signal and monitor format of your TV. You can also change the aspect ratio for
your personal viewing preference. To select an aspect ratio, press the ASPECT
button on your remote control and the STB will cycle to the next available aspect ratio
choice. The following table shows the available aspect ratios.
Source Signal
16:9
4:3
Full - Zoom - Letbox (Letterbox) -
Shrink
Full(No Scaling)
Full Aspect
16:9 or 4:3 picture will be displayed in the center of the viewing screen at full screen
width and height.
Zoom Aspect
The picture will be expanded uniformly (width and height) to fill the viewing screen.
The picture will be cropped, either horizontally or vertically to fit the viewing screen.
The cropped portion of the original picture will be lost from view.
Note: To properly view Closed Captioning, the STB may, in some cases, change the aspect
ratio from Zoom to Full.
Letbox (Letterbox) Aspect
Video formats with aspect ratios greater than 16:9 will be displayed at the proper
width, so no video information is lost. Bars will appear above and below the picture.
El