Filter
Top Products
Special Features
SPECIAL FEATURES
SET UP
Antenna/Cable Mode
Select either Antenna or Cable mode, depending on the type of incoming signal you
are using. Cable must be 8VSB format for DTV reception.
Procedure
£] In SET UP Menu, select iNPUT.
£3 Press the Ib arrow twice, then the • and • arrows to select ANTENNA, Cable STD, Cable
HRC or Cable IRC.
ANTENNA- VHF/UHF
Cable STD - StandardCableTV Signals
CableHRC - HarmonicRelatedCarder
CableIRC - Incremental Related Carrier
Note: Contact your local cable provider ff you are not sure which setting to use.
_1 Press the ACTION button to make your selection.
O Press the 41 arrow to exit back to Roller Guide.
Note: Whenever the antenna or cable mode is changed, Timer I and Timer 2 will revert back
to default settings.
SET UP
SOURCE ANTENNA
CH MAP ON
[]