Step 6a. ACTION / Navigation Button
GETTING STARTED
Press the ACTION button to select main menu items. Press the • or • arrows to
highlight sub menus. Press the • arrow to select features. Press the • or • arrows
to scroll through options within a feature. Press the • arrow to return to main menu
items.
Remote ACTION / Navigation Button
Note: Be careful to press ACTION in the middle of the button. If you do not press in the
middle of the button, the arrow buttons may be activated.
Step 7. Antenna/Cable Mode
Select either Antenna or Cable mode, depending on the type of incoming signal you
are using. Cable must be 8VSB format.
Procedure
[3 In SET UP Menu, select INPUT to choose either ANTENNA or Cable.
{3 Press the • arrow, then the • and • arrows to select ANTENNA, Cable STD, Cable HRC
or Cable IRC.
ANTENNA - VHF/UHF
Cable STD - StandardCableTV Signals
Cable HRC - Harmonic Related Carrier
Cable IRC- IncrementalRelatedCarrier
Note: Contact your local cable provider ff you are not sure which setting to use.
£1 Press the ACTION button to make your selection.
{3 Press the • arrow to exit back to Roller Guide.
Note: Whenever the antenna or cable mode is changed, Timer 1and Timer 2 will revert back
to default settings.
SOURCE ANTENNA
CH MAP ON
[]