Filter
Top Products
34
GETTING STARTED
Step 3c. Digital TV/Cable Reception with Conventional TV
Follow this diagram if you have a conventional TV, cable service and terrestrial
antenna.
Procedure
• Select 480i by using the Video Out button on the front of the HDTV Digital Receiver.
• Connect the antenna cable to one of the inputs (A or B) of the A/B switch.
• If using a cable box, connect the cable wire from the wall jack to the cable box ANT
(antenna) IN jack using a standard RF cable with coaxial connector and connect the cable
box ANT (antenna) OUT jack to the other input (A or B) of the A/B switch.
• If not using a cable box, connect the cable wire from the wall jack to the second input of the
A/B switch using an RF cable (not shown).
• Connect the OUT signal of the A/B switch to the ANT IN jack of the HDTV Digital Receiver.
• Connect the RF OUT jack to the Conventional TV or Monitor by suing a RF cable.
• Connect the NTSC OUTPUTS of the digital receiver to the A/V inputs of the television or
monitor.
SATELLITE
IN
DIGITAL
AUDIO OUT
(AC-3)
®
!
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
HDTV DIGITAL RECEIVER
R-AUDIO-L
ANT IN
CH 3
CH 4
RF OUT
NTSC OUTPUT
R-AUDIO-L VIDEO
S-VIDEO
DIGITAL OUTPUT
H-SYNC-L
R
B G
P
R
P
B
Y
DISTRIBUTED BY
MATSUSHITA ELECTRIC
CORPORATION OF AMERICA
ONE PANASONIC WAY,
SECAUCUS, NEW JERSEY 07094
ASSEMBLED IN MEXICO
TEL LINE
MODEL NO.
SERIAL NO.
AC 120V 60Hz
MAX AMPS
MANUFACTURED
RGB/YP
B
P
R
INPUT
ANT IN
S -VIDEO
VIDEO
AUDIO
R L
ANT
IN
ANT
OUT
A/B
SWITCH
I
ncoming Cable signal
CONVENTIONAL TV or MONITOR
CABLE BOX
HDTV DIGITAL RECEIVER
NOTE:
ANTENNA, A/B SWITCH, RF
CABLES, CABLE BOX, VIDEO AND
S-VIDEO CABLES NOT INCLUDED.
R
DIGITAL TV/CABLE RECEPTION WITH CONVENTIONAL TV (CABLE
SERVICE AND TERRESTRIAL ANTENNA)