Filter
Top Products
64
ROLLER GUIDE MENU OPERATIONS
Setup : Satellite Setup – Sat. Ports
You will be able to select 4 satellite port configurations - No Satellite, Auto
Configuration, Satellite A, B or Satellite A, B, C. The DIRECTV Plus Satellite Antenna
comes packaged with two LNB’s (Low Noise Block Down-converters) with a
multiswitch. The two LNB’s allow for reception of Satellite A, B. These satellites are
located at 101 degree WL and 119 degree WL. The DIRECTV Plus Satellite antenna
is also capable of accommodating a third LNB for future programming choices.
Therefore, if you plan to subscribe to DIRECTV services, including HDTV as well as
local to local broadcast channels, you should select Satellite A, B during this setup.
The multiswitch provided with the DIRECTV Plus satellite antenna enables you to
connect 4 different HDTV Digital Receivers in your home. Please consult your dealer
for more details. The HDTV Digital Receiver will allow you to begin auto-detection of
the antenna configuration or instead use one of the 4 nominal cases.
Note: Please also refer to the installation manual for the satellite dish antenna for
proper mounting procedure.
Procedure
H Press K and G button to setup satellite ports configuration.
H Press FG buttons to navigate among the choices - No Satellite, Auto Configuration, Sat.
A and B and Sat. A, B and C.
H Select Auto Configuration if you have Round Dish. Select Sat A & B, if you have Oval
shaped dish.
H Press ACTION button to save the selection.
H Press J button to return to Sat. Setup menu.
Satellite Setup – Sat. Ports Screen
G Sat Setup
Sat Ports
Dish Pos
Sig Meter
Dish Type
K Oval
K
No Satellite
Auto Configuration
Sat A and B
Sat A, B and C
Press K to setup satellite ports.