Filter
Top Products
C4631M (11/09) 33
INSTANT MOTION RECORD MODE
The unit allows you to manually start and stop the instant recording mode. You can configure each camera to record at a different resolution,
quality, and image rate to capture instant recording video.
The DX4104 allows you to configure the following instant recording settings for each camera:
• Channel: Selects the channel (01 to 04) for configuration.
• Resolution: Sets the resolution for the channel. The default is 352 x 240.
• Quality: Sets the picture quality of recorded video: LOWEST, LOW, STANDARD, HIGH, HIGHEST.
• Image Rate: Sets the image rate. Refer to Table B for more information.
To set up the instant recording mode:
1. From the Camera menu, click Instant Record.
2. Click the Channel box, and select the channel to configure.
3. Click the boxes to enter their settings.
4. Repeat steps 2 and 3 to configure the other channels.
5. Click Close.
6. Click OK.
Table E. Resolution and Image Rate
Resolution Image Rate
NTSC 352 x 240 1, 3, 5, 7.5, 15, 20, 30
704 x 240 1, 3, 5, 7.5, 15
704 x 480 1, 3, 5, 7.5
PAL 352 x 288 1, 3, 5, 6, 12.5, 20, 25
704 x 288 1, 3, 5, 6, 12.5
704 x 576 1, 3, 5, 6