Pelco PMCLNBWMT TV Mount User Manual


 
15 C2258M (5/11)
STEEL STUD INSTALLATION
The supplied M6 steel stud anchors must be used to install the mount to steel studs. Do not use lag bolts or wood screws
(Figure 18).
Steel Stud Anchor Screw Steel Stud Anchor Sleeve
Figure 18. Steel Stud Components
1. Identify the general location on the wall where you will be mounting your flat-panel.
2. Use a stud finder (not included) to determine the exact center of each steel stud in the vicinity of the mounting location (Figure 19).
3. Use a pencil (not included) and mark the exact center of each steel stud.
X
Figure 19. Using a Stud Finder