Filter
Top Products
22 C2258M (5/11)
Lock-It™ Security Barrel Installation (Optional)
Optional security configurations include using commercially available combination or keyed padlocks.
To install the security barrel:
1. Remove the locking screw from the mounting bracket.
2. Place the locking screw into and through the security barrel (Figure 31).
3. Re-insert the locking screw and security barrel into the mounting bracket.
4. Tighten the locking screw and security barrel until seated in the mounting tab (Figure 32).
Do not thread the locking screw any further once it is even with the mounting tab. Threading the locking screw any further will prevent you from
safely attaching the flat-panel to the wall plate.
Do not overtighten the locking screw.
Proceed to the Attaching the Flat-Panel to the Wall Plate section on page 23.
Lock-It™ Security
Barrel
Locking Screw
Figure 31. Placing the Locking Screw Through the Security Barrel
Figure 32. Tightening the Security Barrel Against the Mounting Tab
Mounting Tab