Filter
Top Products
23 C2258M (5/11)
Attaching the Flat-Panel to the Wall Plate
This section requires two people.
Do not release your flat-panel until you are certain that top and bottom hooks of both mounting brackets are securely seated on the upper and
lower mounting rails of the wall panel.
1. Raise the flat-panel past the top and bottom mounting rails on the wall panel.
2. Slide the flat-panel down slowly, keeping it close to the wall (Figure 33).
3. Engage the top and bottom mounting brackets to the rails of the wall plate (Figure 34).
Proceed to the Mounting Bracket Adjustments section on page 24.
Figure 33. Sliding the Flat-Panel On the Wall Plate
Figure 34. Using the Mounting Brackets