Philips 29PFL4908/F7 Flat Panel Television User Manual


 
14
English
Before you connect AC power cord:
Be sure other devices are connected properly before plugging in the AC
power cord.
Selecting your connection quality
HDMI - Highest quality
Supports high-definition Digital signals and gives highest picture and
sound quality. Video and audio signals are combined in one cable.
You must use HDMI for full high-definition video and to enable Philips
EasyLink (HDMI CEC).
Component (Y Pb Pr) - High quality
Supports high-definition Analog signals but gives lower picture quality
than HDMI. Component (Y/Pb/Pr) Video cables combine red / green /
blue video cables with red / white audio (L/R) cables. Match the cable
colors when you connect to the TV.
Composite - Basic quality
For analog connections. Composite Video / Audio Analog cable usually
combine a yellow video cable with red / white audio (L/R) cables. With
this unit, yellow cable must be connected to Y (green) jack of
Component Video Input jacks.
Connecting your devices
HDMI Digital connection
HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high definition
Digital video and multi-channel Digital Audio through a single cable.
HDMI-DVI connection
This unit can be connected to your device that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires
audio cable for Analog Audio signal as well.
Continued on next page.
No supplied cables are used with these connections:
Please purchase the necessary cables at your local store.
Note
Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is
a form of Digital Rights Management that protects high definition content in Blu-ray
discs or DVDs.
The HDMI-ARC connector on the TV features HDMI-ARC functionality. This allows
output of TV Audio to an HDMI-ARC-compliant device.
Note
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI
cable is recommended for the better compatibility.
For HDMI connection
The unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of video signals,
32kHz / 44.1kHz and 48kHz of audio signals.
This unit accepts 2 channel Audio signal (LPCM) only.
This unit accepts only signals in compliance with EIA861.
For HDMI-DVI connection
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
HDMI-DVI connection requires separate audio connections as well and the audio
signals are output as Analog (L/R) Audio.
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
INININ
OUT
set-top box
or
Blu-ray disc player
or
HD game console
HDMI cable
INININ
OUT
IN
ININ
OUT
HDMI-DVI
conversion cable
Audio (L/R) cables
cable receiver or
satellite box with the
DVI Output jack