Filter
Top Products
29
English
Before you begin:
You must set Home in Location. ➟ p.35
Otherwise, personalized Picture and Sound settings will not be
memorized after the unit goes into Standby mode.
1 Press (MENU) and use ▲▼◄► to select Setup then press
OK.
2 Use ▲▼ to select Sound, then press OK.
3
Use ▲▼◄► to select the item you want to adjust, then press
OK
.
The following sound settings can be configured. Depending on the
format of the broadcasting, some sound settings are not available.
Adjust the tonal quality for each frequency.
Adjust the speakers to suit your listening preference.
You can select the Audio language while your TV is receiving the Digital
broadcasting.
You can select Main or SAP while your TV is receiving the Analog
broadcasting that has the SAP (Second Audio Program).
(It differs depending on the program.)
When you set to Main in Alternate audio above, you can select Mono
or Stereo if the Analog broadcasting is sending the MTS (Multichannel
television sound).
This selects sound modes for more spatial or surround sound
reproduction.
This function keeps a constant loudness differential between the TV
commercials and the programs.
You can select the Audio Output from the unit’s speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit’s remote control. Make sure Master EasyLink
is set to On. ➟ p.36
Adjust headphone volume.
You can set the digital audio output format from SPDIF/ARC.
If a channel or Input device is too loud or too soft, navigate to that
channel or Input device.
Auto sound
to select the desired setting.
(Personal, Standard, Vivid, Sports, Movie, Music and
News)
When you adjust the following settings (Equalizer, SRS
TruSurround HD and Auto volume leveling), Personal
sound will be set automatically.
Equalizer
Cursor ◄ Cursor ►
to adjust each level of tonal quality
Press BACK to go back to the previous menu.
Balance
Cursor ◄ Cursor ►
to adjust the balance of the right and left speakers
Sound
TV speakers
Headphone volume
Auto volume leveling
Off
SRS TruSurround HD
On
Digital audio language
English
On
Picture
Settings assistant
Auto sound
Equalizer
Personal
Start now
Sound
Features
Installation
Software
Balance
Digital audio
language
to select the language according to your preference.
(It differs depending on the program.)
Alternate audio
Main
to output main-audio
SAP
to output second-audio program
Mono/Stereo
Mono
to output mono-audio
Stereo
to output stereo-audio
SRS TruSurround
HD
Off
to set SRS TruSurround HD™ to Off
On
to set SRS TruSurround HD™ to On
Auto volume
leveling
Off
to remove the auto volume leveling
On
to reduce volume differences between
the TV commercials and the programs
TV speakers
Off
not to output sound from the unit’s
speakers
On
to output sound from the unit’s speakers
Speakers
EasyLink
to control Audio Output from your
connected EasyLink Compliant Devices
with VOL + / − by using this unit's
remote control.
Headphone
volume
Cursor ◄ Cursor ►
to decrease or increase volume
Digital output
format
PCM
to output PCM signals.
Multichannel
to output multichannel signals.
(When the audio of the content is PCM,
it will be output in PCM even if
Multichannel is selected.)
Delta volume
Cursor ◄ Cursor ►
to set a negative delta
volume level as per your
personal preferences
to set a positive delta
volume level as per your
personal preferences
Note
• Alternate audio and Mono/Stereo are not available when you watching TV programs
with a cable box or satellite set-top box connected through an HDMI cable or
Component / Composite Video cables.
Digital TV operation
Analog/Cable TV operation
Analog/Cable TV operation