Philips 29PFL4908/F7 Flat Panel Television User Manual


 
16
English
Connecting the TV to the Internet using a wireless LAN
Digital Audio Output Connection
If you connect this unit to an external Digital Audio device, you can
enjoy multi-channel audio like 5.1ch Digital broadcasting sound.
Use a Digital Audio coaxial cable to connect the unit to external Digital
Audio devices.
PC connection
HDMI connection
This unit can be connected to your PC that has a HDMI terminal. Use an
HDMI cable for this Digital connection.
HDMI-DVI connection
This unit can be connected to your PC that has a DVI terminal. Use an
HDMI-DVI conversion cable for this Video Digital connection and it
requires Stereo mini 3.5mm plug Audio cable for Analog Audio signal as
well.
VGA connection
This unit is equipped with a PC Input jack. If you connect this unit to
your PC, you can use this unit as a PC monitor.
Use a VGA cable for this Video connection and it requires a Stereo mini
3.5mm plug Audio cable for Analog Audio signal as well.
Continued on next page.
Note
After you made the wireless connection, set up necessary network settings. Network
p.37
Use a Wireless LAN Access Point (AP) (e.g. wireless router) which supports IEEE
802.11 b/g/n. (n is recommended for stable operation of the wireless network.)
This unit does not support Ad-hoc mode.
Other radio devices or obstacles may cause interference to the wireless network
connection.
WLAN
LAN
Broadband router
Ethernet cable
Network provisioning
equipment
Internet
INININ
OUT
OUTOUT
Digital home theater
amplifier
Digital Audio coaxial cable
INININ
OUT
PC
HDMI cable
OUT
IN
ININ
OUT
INININ
HDMI-DVI
conversion cable
PC
Stereo mini 3.5 mm plug Audio cable
OUT
PC
IN
IN
IN
IN
IN
IN
OUT
Stereo mini 3.5 mm plug Audio cable
VGA cable