Filter
Top Products
User Manual
45
Adjusting the Settings
Moving a Device
1 Select a device and choose Edit.
The ‘Modify a Device’ screen will appear.
2 Choose Name/Room.
The ‘Modify Device Assignment’ screen will
appear.
3 In the Room list, select the room to
which you want to reassign the device
to.
Note If you want, you can optionally also rename the device.
4 Choose OK.
The RC9800i will display the ‘Set Up A/V Devices’ screen. The device is now
reassigned to the room you selected.
Changing the remote control codes of a device
1 On the screen ‘Set Up A/V Devices’, select a device and choose Edit.
The ‘Modify a Device’ screen will appear.
2 Choose IR Codeset.
The ‘Codes Setup’ screen will appear.
The screen displays 3 possibilities to change your IR settings:
■ If some of your buttons don’t work and/or you want to learn/replace codes, use the
Try & Learn method. To do so, please perform steps 3 - 4 as described in ‘Learn &
Match’ beginning on page 21.
■ If you want to assign codes to user-defined buttons yourself, use the User buttons
method. To do so, take the following steps:
1 Choose User buttons.
The ‘Try & Learn - User Defined Buttons’ screen will appear.
Note All functions are red, since they are all unknown to the device.
2 Select a function.
The selected function will be highlighted.
3 Choose Learn.
Learn the function from your device’s original remote control.
Note To test the function and see if the device reacts, choose Try.
■ If you want to choose a different codeset, use the Select & Try method. To do so,
perform the steps described in ‘Select & Try’ beginning on page 23.