Filter
Top Products
User Manual
52
Upgrading the Firmware
You can upgrade the RC9800i firmware via USB.
Attention! Dock the RC9800i into its cradle while upgrading its firmware.
1 On your PC, open your Internet browser and go to
http://www.homecontrol.philips.com. Follow the link to the software
upgrades section.
2 Download the RC9800i Firmware Update Tool onto your PC.
3 Connect the RC9800i to your PC by means of the USB cable.
4 Dock the RC9800i in its cradle.
5 On the Homepage of the RC9800i, tap .
The System Management Area will appear.
6 Choose Settings.
The ‘Settings’ screen will appear.
7 Choose Services Setup.
The ‘Services Setup’ screen will appear.
8 Choose Software Updates.
The ‘Software Updates’ screen will appear.
9 Choose USB Update.
10 Start the RC9800i Firmware Update Tool on your PC.
11 Follow the instructions on the PC screen and on your RC9800i.
A series of messages will appear on the PC monitor. When the firmware is
upgraded, the RC9800i will reboot automatically.
Tip You can check in the About area that a newer firmware is installed and running on your
RC9800i.