Filter
Top Products
English
29
Before Recording (continued)
HDD settings (underlined options are the factory default settings)
This option allows you to control the behavior of the Time Shift
Buffer.
{ Yes } – Select to retain the contents in the temporary HDD
storage when you switch the tuner’s TV channel or
external video input source.
{ No } – Select to clear the contents in the temporary HDD
storage.
Press OK to display information on:
– Hard disk size in MB ( Megabytes).
– Used space in MB ( Megabytes).
– Remaining space in MB ( Megabytes).
– Number of titles stored on the HDD.
This option determines how the recorder will respond when
the HDD is full of recordings.
{ Automatic }–During recording, when the HDD is full, the
recorder will proceed to overwrite any unprotected
recordings in the HDD. The oldest unprotected
recordings will be deleted rst.
{ Manual } – During recording, when the HDD is full, recording
will be stopped. A warning message { The hard disk
is full. Please erase some programs to allow
further recording. } will appear on the screen.
This option will erase all marked/ unmarked recordings on the
HDD. This option is not available when recording to HDD is in
progress.
Press to highlight OK.
A warning message will appear. Select
OK
OK
to proceed or
OK
CANCEL
to abort. Once complete, the recorder will switch to standby
mode.
This option will erase all content on a DVD±RW disc, including
those that were not recorded on this recorder. This option
is only available in tuner mode.
Press to highlight OK.
A warning message will appear. Select
OK
OK
to proceed or
OK
CANCEL
to abort.
Save Time Shift
Buffer
HDD Info
Space Management
Delete HDD
Delete Optical Disc