Philips DVP3200V/37 DVD VCR Combo User Manual


 
English
Hookups (cont’d) 11
ANT
-
IN
ANT-OUT
IN
OUT
75
AN
T /
C
AB
LE
TV’s ANTENNA
IN Jack
Cable Box/Satellite Receiver
DVD/VCR
Connections
1
Connect a Cable TV or Satellite signal to
the DVD/VCR’s ANT-IN (Antenna In) jack.
2
Use an RF coaxial cable (as the one supplied) to connect
the ANT-OUT (Antenna Out) jack on the DVD/VCR to
the IN jack on the Cable Box/Satellite Receiver.
3
Use a second RF coaxial cable to connect the OUT jack on
the Cable Box/Satellite Receiver to the ANTENNA IN jack
on the TV.
4
Plug in the power cord of your TV.Turn on the TV and set
it to channel 3 or 4.
5
Plug in the power cord of the DVD/VCR.You are ready to
turn on the DVD/VCR. Go to page 16 before turning it on.
Remember...
There are two ways to connect your Cable Box/Satellite Receiver to the
DVD/VCR. With the connection on this page:
You may watch one channel while recording another.Follow these steps:
1) Put the Cable Box/Satellite Receiver on the same channel as the
DVD/VCR’s output channel (03 or 04). The DVD/VCR’s output
channel is channel 3 as a default. To alternate it between 3 and 4,
press and hold PLAY B (VCR) on the front of the DVD/VCR for 3-5
seconds during tape playback. For details, see step 4 on page 9. Set the
TV to the Cable Box/Satellite Receiver output channel (03 or 04).
2) Press VCR to put the DVD/VCR in VCR mode.VCR light will appear
on the front of the DVD/VCR.
3) Press TV/VIDEO on the remote to choose VCR position.
4) Press CH + or CH - to select the channel you want to record at the
DVD/VCR. Press REC
I to start the recording.
5) Press TV/VIDEO on the remote once to put the DVD/VCR in TV
position.
6) Select the channel you want to watch at the Cable Box/Satellite
Receiver.
When you play a tape or disc, make sure the Cable Box/Satellite
Receiver is set to the DVD/VCR’s output channel (03 or 04).
Set the TV to the Cable Box/Satellite Receiver output channel (03 or 04).
1
2
3
Cable
Signal
RF coaxial cable
RF coaxial cable
DVD/VCR to Cab
le Box or Satellite Receiv
er and TV
Using only basic RF coaxial cables
This connection will let you use the features of both the VCR and the DVD player.
E8A21UD_EN1 5/29/06 3:13 PM Page 11