Philips DVP3200V/37 DVD VCR Combo User Manual


 
English
24 Videotape Recording
Read and follow the steps below to record a television program
onto a videotape.
Before you begin, make sure the DVD/VCR is in VCR mode.
Press VCR so VCR light appears on the front of the DVD/VCR.
1
Turn on the TV and set it to channel 3 or 4 or the
Video In channel. If you connected the DVD/VCR to the
TV using the supplied audio and video cables, select your
TV’s Video In channel. Details are on page 12.
If you connected the DVD/VCR to the TV using the
supplied RF coaxial cable, choose channel 3 (or 4) at the TV.
Details are on pages 9-11.
2
Insert a tape with its record tab intact into the
cassette compartment of the DVD/VCR. If tape
playback begins, press STOP C.
3
Press REC MODE repeatedly until the desired tape
speed (SP or SLP) appears briefly on the screen.
Details about tape speed are on page 67.
4
Press CH + or CH - or the Number buttons to
select the TV channel to record.
5
Press REC I to start recording. “REC” will appear on
the DVD/VCR’s display panel.
6
To pause the recording, press PAUSE k once. “REC”
will flash. To r esume recording, press REC I or press
PAUSE k again. “REC” will reappear.
7
To stop recording, press STOP C.
Recording Prevention
Video cassettes have record tabs to ensure that recordings are
not accidentally erased.
1
To prevent recording, break off the tab with a
screwdriver.
2
To allow recording, cover the hole with clear tape.
Other recording options are on
pages 25-30.
• The VCR will record in a preset
volume.
Pause will switch to Stop after 5
minutes to protect the VCR and
the tape from damage. When a
recording is paused, review the
pause time remaining with
the marks on the screen.
Each mark equals
1 minute remaining. During the
last minute of paused recording,
the mark will flash.
If any menu is on the TV screen,
REC I on the remote does not
function. Press CLEAR to
remove the menu. Then,press
REC I.Or, use REC I on the
front of the DVD/VCR.
Helpful Hints
1
Turn on the TV.
2
Insert a tape in the
DVD/VCR.
Remove the
tab to prevent
recording.
Cover the
hole to allow
recording.
SETUPMENU
DISPLAY
TIMER SET
BACK
PLAY
REW FFW
PREV NEXTPAUSE
REC STOP
OK
REPEAT
REPEAT
A-B
CH
+
-
CLEAR
REC MODE SEARCH MODE TITLE
6
4
3
4
7
5-6
E8A21UD_EN1 5/29/06 3:13 PM Page 24