Filter
Top Products
English
75
ANT /
CABLE
ANT
-
IN
ANT-OUT
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD
L
R
L
R
L
R
S-VIDEO
OUT
COMPONENT
VIDEO OUT
Y
C
B
/
P
B
AUDIO OUT
DVD/VCR
VCR
ANT
-
IN
ANT-OUT
VIDEO OUT
AUDIO IN
VIDEO IN
C
R
/
P
R
Black RF coaxial
cable (supplied)
Antenna or
Cable TV
signal
Antenna In Jack
(on back of TV)
example only
1
2
Hookups (cont’d) 9
1
Disconnect the antenna or Cable TV signal from your TV and
connect it to the ANT-IN (Antenna In) jack of your DVD/VCR.
2
Connect the supplied black RF coaxial cable to the ANT-OUT
(Antenna Out) jack on the back of the DVD/VCR and to the
ANTENNA IN jack on the TV. The ANTENNA IN jack on the TV may be
labelled TV IN, RF IN, 75Ω (ohm) or ANT-IN. See your TV owner’s manual for
assistance.
3
Plug in the power cord of your TV.Turn on the TV and set it to
channel 3 or 4.
4
Plug in the power cord of the DVD/VCR.You are ready to turn on
the DVD/VCR. Go to page 16 before turning it on.
The DVD/VCR’s output channel is 3 when you purchase it. So, set your TV to
channel 3 when the DVD/VCR is new.
If you cannot use channel 3 at your TV, you can change the DVD/VCR’s output
channel to channel 4. To do so, press VCR to put the DVD/VCR in VCR mode.
VCR light will be on the front of the DVD/VCR. Insert a videotape and press
PLAY B to start playback. During playback, press and hold (VCR)
PLAY B on the front of the DVD/VCR for 3-5 seconds. Each time you
do this, the DVD/VCR’s output channel switches between 3 and 4, and the
selected channel number appears on the display panel. Change your TV to
channel 3 or 4 accordingly.(You cannot change the DVD/VCR’s output channel
while adjusting tracking manually. Press STOP C to stop playback and cancel
manual tracking, then press PLAY B to resume playing and change the output
channel.)
There is not a channel 3/4 switch on the DVD/VCR (as customary with most
VCRs).
DVD/VCR to TV only
Simplest connection using only the supplied black RF coaxial cable
This connection will let you use the features of both the VCR and the DVD player.
E8A21UD_EN1 5/29/06 3:13 PM Page 9